CD6 Hardware

The CD6 is a configurable driver dash-display with a high-brightness, LED-backlit IPS TFT. It comes in two sizes:

Model Display diagonal
CD6-43 4.3 inch
CD6-50 5.0 inch

The hardware pages summarise GEMS Technical Specification 105497, Revision 3. Before wiring, confirm that this revision applies to your unit.

  • Specifications: display, inputs, outputs, communications, logging and mechanical data.
  • Connector And Pinout: the 41-way connector, its mating part and the function of every pin.

Configuration And Models

Configure inputs, CAN, screens, logging and outputs with GEMS Dash Design. See Configuring with Dash Design. A custom model does not drive this hardware directly. It works through dash channels and the functions listed in What a Model Can Access.

Subsections of CD6 Hardware

Specifications

These values come from GEMS Technical Specification 105497, Revision 3. Items the specification lists as TBD or TBC are not yet defined. Do not infer them from another GEMS product.

Power

Parameter Value
Operating voltage 7 V to 18 V
Power consumption at 12 V TBD

Display

Parameter Value
Type IPS TFT, LED backlit, with anti-glare filter
Resolution 800 x 480 pixels, true colour
Size (diagonal) 4.3 inch (CD6-43) or 5.0 inch (CD6-50)
Brightness 800 cd/m²
Contrast ratio 1000:1

External Inputs

Input Count Details
Analogue 7 0-5 V, 12-bit
Speed 4 Hall-effect type
Camera 2 SDTV CVBS composite, PAL or NTSC
Button 2 Active low
Beacon 1 Pull to ground to trigger
Ambient light sensor 1

Internal Sensing

Measurement Count
Supply voltage 1
Internal supply monitoring 4
Internal temperature 1
Processor temperature 1
Real-time clock (RTC) 1
Inertial measurement unit (G-sensor) 1, six-axis

Outputs

Output Count
Low-side drivers 4
Tri-colour LEDs 10
5 V sensor supply 1

Revision 3 does not specify current ratings for the low-side drivers or the sensor supply.

Communications

Interface Count Use
CAN 2.0 / CAN-FD 2 User-configurable baud and data rates. Software-selectable termination.
Ethernet 100BASE-TX 1 Configuration, log download and XCP-Ethernet communication
Serial (RS232) 1 Bidirectional GPS/ECU data stream
USB 2.0 1 Configuration and log download

The pinout lists the serial Rx and Tx pins as 5 V level.

Data Logging

256 Mbyte of storage, with configurable log rates of up to 1 kHz per channel.

Mechanical

Parameter Value
Casing Anodised aluminium
Connector One 41-way Autosport Double Density, AS-DD212-41PN-975A
Size TBD
Dimensions TBC
Weight TBD

Connector And Pinout

The CD6 has a single 41-way Autosport Double Density connector. This pinout comes from GEMS Technical Specification 105497, Revision 3.

Warning

Before wiring, confirm that Revision 3 applies to your unit.

Connector

ID Unit connector Loom (mating) connector
1 AS-DD212-41PN-975A AS-DD612-41SN

Pins By Function

Function Pins
+12 V power supply 1, 2
Ground 41
USB 3-6
CAN1 7, 8
CAN2 9, 10
Beacon 11
Serial (5 V level) 12, 13
5 V sensor supply and analogue ground 14, 15
Analogue inputs 1-7 16-22
Low-side drivers 1-4 23, 28, 29, 30
Ethernet 24-27
Speed inputs 1-4 31-34
Buttons 1-2 35, 36
Video (camera) inputs 37-40

Pinout

Pin Signal Notes
1 +12V 12 V power supply
2 +12V 12 V power supply
3 USB DM USB data -
4 USB DP USB data +
5 USB VBUS
6 USB GND
7 CAN1 H
8 CAN1 L
9 CAN2 H
10 CAN2 L
11 Beacon Active low
12 Serial Rx 5 V level
13 Serial Tx 5 V level
14 5V Sensor supply
15 Analogue ground
16 Analogue 1
17 Analogue 2
18 Analogue 3
19 Analogue 4
20 Analogue 5
21 Analogue 6
22 Analogue 7
23 Low-side driver 1
24 Ethernet RXP
25 Ethernet RXN
26 Ethernet TXP
27 Ethernet TXN
28 Low-side driver 2
29 Low-side driver 3
30 Low-side driver 4
31 Speed input 1
32 Speed input 2
33 Speed input 3
34 Speed input 4
35 Button 1
36 Button 2
37 Video2 In+
38 Video2 In-
39 Video1 In+
40 Video1 In-
41 GND