CD6 Manual

This manual covers the GEMS CD6 Dash Display Module: its hardware, its configuration with GEMS Dash Design, and optional custom models that run on its dedicated model processor.

GEMS CD6 dash-display GEMS CD6 dash-display

How a CD6 Is Configured

A CD6 is configured in two layers:

  1. Display setup (every CD6). You create it in GEMS Dash Design. It defines channels, CAN messages, screens, alarms, LEDs, logging and outputs. Uploading it programs the display. No coding is needed.
  2. Custom model (optional). Your own Simulink®-generated or C application, built with the CDX Model Runtime. It runs on the CD6’s Cortex-M4 at a fixed rate, alongside the display firmware. It receives dash channel values and returns results as new channels. See Custom Models (CDX).

Where To Start

To… Read
Check specifications or wire the connector CD6 Hardware
Install Dash Design, create screens, configure CAN or update firmware Configuring with Dash Design
Find out what custom models are for Custom Models (CDX)
Build a first model and run it on a CD6 Quickstart: Hello World
Bring a Simulink model to the CD6 Simulink Projects
Look up a CDX function CDX Runtime API Reference

Manual Contents

Scope

The hardware pages are based on GEMS CD6 Technical Specification 105497, Revision 3. The CDX Runtime API Reference documents the headers in the runtime’s include folder. The Dash Design manual is the authoritative reference for setup editing.