Connector And Pinout

The CD6 has a single 41-way Autosport Double Density connector. This pinout comes from GEMS Technical Specification 105497, Revision 3.

Warning

Before wiring, confirm that Revision 3 applies to your unit.

Connector

ID Unit connector Loom (mating) connector
1 AS-DD212-41PN-975A AS-DD612-41SN

Pins By Function

Function Pins
+12 V power supply 1, 2
Ground 41
USB 3-6
CAN1 7, 8
CAN2 9, 10
Beacon 11
Serial (5 V level) 12, 13
5 V sensor supply and analogue ground 14, 15
Analogue inputs 1-7 16-22
Low-side drivers 1-4 23, 28, 29, 30
Ethernet 24-27
Speed inputs 1-4 31-34
Buttons 1-2 35, 36
Video (camera) inputs 37-40

Pinout

Pin Signal Notes
1 +12V 12 V power supply
2 +12V 12 V power supply
3 USB DM USB data -
4 USB DP USB data +
5 USB VBUS
6 USB GND
7 CAN1 H
8 CAN1 L
9 CAN2 H
10 CAN2 L
11 Beacon Active low
12 Serial Rx 5 V level
13 Serial Tx 5 V level
14 5V Sensor supply
15 Analogue ground
16 Analogue 1
17 Analogue 2
18 Analogue 3
19 Analogue 4
20 Analogue 5
21 Analogue 6
22 Analogue 7
23 Low-side driver 1
24 Ethernet RXP
25 Ethernet RXN
26 Ethernet TXP
27 Ethernet TXN
28 Low-side driver 2
29 Low-side driver 3
30 Low-side driver 4
31 Speed input 1
32 Speed input 2
33 Speed input 3
34 Speed input 4
35 Button 1
36 Button 2
37 Video2 In+
38 Video2 In-
39 Video1 In+
40 Video1 In-
41 GND