Common EM80 Setup queries
Moderators:R!C0, JonMan, RickS
There follows a list of small documents for helping setup the EM80 generic ECU.
The list and its contents will be added to and amended as required...
The list and its contents will be added to and amended as required...
- Attachments
-
- 12 Active Throttle.doc
- Setting up an Active Throttle
- (65.5KiB)Downloaded 2351 times
-
- 11 Variable Valve Timing.doc
- Basic VVT / VVC control
- (84KiB)Downloaded 2327 times
-
- 10 Lambda or Oxygen Feedback.doc
- Lambda feedback and control
- (41.5KiB)Downloaded 2349 times
-
- 09 Ignition.doc
- Mapping the basic ignition requirements
- (143KiB)Downloaded 2352 times
-
- 08 Fuelling.doc
- Mapping the basis fuelling requirements
- (103KiB)Downloaded 2390 times
-
- 07 Anti-Lag and Torque reduction.doc
- Anti-Lag and other torque reduction techniques
- (281.5KiB)Downloaded 2369 times
-
- 06 Idle Control.doc
- Controlling the Idle spped
- (78.5KiB)Downloaded 2353 times
-
- 05 Load Sensing.doc
- Pedal, MAP or MAF as load
- (26.5KiB)Downloaded 2352 times
-
- 04 Tooth Control & Engine Speed.doc
- Tooth Control tables and syncing.
- (764.5KiB)Downloaded 2395 times
-
- 03 Inputs & Outputs.doc
- I/O (Timed, PWM, Speed and Analogue)
- (117KiB)Downloaded 2409 times
-
- 02 Quick Start.doc
- Quick guide for those familiar with GEMS strategies
- (229KiB)Downloaded 2427 times
-
- 01 Features & Setup.doc
- List of features, pin-out and initial setup hints and tips
- (197.5KiB)Downloaded 2458 times