Lambda Table Grid and Calibration of Bosch LSU

MASAMICHI TAKIZAWA · Post by **MASAMICHI TAKIZAWA** » Wed Sep 23, 2009 1:47 am

Hi,

I'm going to use Bosch LSU for EVOX.

Thanks to evosoh, I understand wiring, but I have no Lambda Table Grid for Bosch LSU,
and I don't know how to Calibrate the sensor.

How I get the Lambda Table Grid and calibration method?

Please teach me.

RickS · Post by **RickS** » Thu Sep 24, 2009 11:23 am

Hi There,

Yes that was a good explanation by evosoh.

The Bosch LSU was used for the Base calibrations we made. You can download the base calibration here: http://www.gems.co.uk/?content=pages&id ... and-setups
and copy and paste the Lambda 1 table into your calibration. It is always worth correcting this table for each sensor if you get the chance to plug an external gauge and sensor in.

Hope this helps
Ed

MASAMICHI TAKIZAWA · Post by **MASAMICHI TAKIZAWA** » Thu Sep 24, 2009 5:05 pm

Thank you EdH.

I understand.

Lambda Table Grid and Calibration of Bosch LSU

Re: Lambda Table Grid and Calibration of Bosch LSU

Re: Lambda Table Grid and Calibration of Bosch LSU