Base Map Requests Here!

Post here if you have an issue with a GEMS Product

Moderators:R!C0, JonMan, RickS

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am
Re: Base Map Requests Here!

Post by RickS » Mon Dec 06, 2010 10:34 am

Hello,

I can't find one of these i'm afraid.

Thanks
Ed

aong777
New User
Posts:2
Joined:Fri Apr 23, 2010 10:31 pm

Re: Base Map Requests Here!

Post by aong777 » Mon Aug 29, 2011 3:15 pm

hi ,
I am use EM36 s/n 34919 model EM36 ACT version em36 00v89

my car suzuki swift sports 1600cc
- 4 injector .
- crank index hall effect 36 teeth missing 6 same suburu 2002 in manual EM36 but cam not same.
- cam index hall effect 4 teeth extra 2 teeth
- ignition wavespake 1-4 ,2-3 .
- vcc cam control.
- active throttle.


thanks
Attachments
Signal swift.pdf
signal
(57.01KiB)Downloaded 1159 times
Crank_Cam_Swift.pdf
teeth pattern
(83KiB)Downloaded 1082 times

Arnoldas
New User
Posts:1
Joined:Wed Aug 13, 2008 6:37 pm

Base Map Requests Here!

Post by Arnoldas » Thu Sep 05, 2013 12:14 pm

Hi,

I am use ECU EM36 version em36 00v89
I would like to request for a base map a Mitsubishi EVO 9 .

Thanks!

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: Base Map Requests Here!

Post by RickS » Mon Sep 09, 2013 11:56 am

I have found the attached setup that is a partial conversion of an Lancer+9 01v24. It appears that all of the fuelling and ignition maps are correct and the majority of options are set correctly. It's set for 4 teeth per cycle.

What needs to be addressed are:-
Fuel Tooth options
PWM settings

This should prove a starting point and I will continue to look to see if I have anything more refined. DO let me know if you complete this successfully and I will add it to our archives if you would send me a copy of the finished CAL.

BR
RickS
Attachments
EVO9.EM36 .00V89.cal
Preliminary EVO9 for EM36 00v89
(20.45KiB)Downloaded 951 times

Post Reply