GEMS DA36

Post here if you require technical information regarding a GEMS product

Moderators:R!C0, JonMan, RickS

Post Reply
Xen
New User
Posts:6
Joined:Sat Mar 15, 2008 4:15 pm
GEMS DA36

Post by Xen » Sat Mar 15, 2008 4:19 pm

Hello,

I have just bought a brand new GEMS DA36 display, but I cannot find any informations over the website here about this product. I know this was used on the works Escort WRCs, but I don't know much more. Is there a manual anywhere to start to work with it ?

Also can this display work with P8 ECU or does it has to work with T6 or else ?

Thanks in advance for the answers,

Matt.

Xen
New User
Posts:6
Joined:Sat Mar 15, 2008 4:15 pm

Re: GEMS DA36

Post by Xen » Sat Mar 15, 2008 4:20 pm

Find attached a picture of the display.
Attachments
gemsda36.jpg
(51.93KiB)Downloaded 261 times

streets
GEMS Engineer
GEMS Engineer
Posts:1
Joined:Mon Mar 17, 2008 11:29 am

Re: GEMS DA36

Post by streets » Mon Mar 17, 2008 3:36 pm

Hi the DA36 was fitted to the 1997 works Escort WRC prepared by MSport and also has been used on various privateer built Escorts and other Group N and WRC cars.
There are various specs of both hardware and software if the unit has a serial number we may be able to identify it.
It will probably set up to read the CAN from the Pectel T6 as well as data from a DA97 data logger.
It can be set to read a serial stream from a GEMS P8 unit but not Pectel one.

Your other unit is a pre 1996 Diff control system monitor. this unit logger data from one or both of the diff controller on a FFD designed gearbox. It is noth the actual controller. It is not useful for anything else.
Hope this helps

Xen
New User
Posts:6
Joined:Sat Mar 15, 2008 4:15 pm

Re: GEMS DA36

Post by Xen » Mon Apr 14, 2008 5:06 pm

Hello,

The serial number is : 01x65 and it is a brand new unit, tested 15th of January 2002 by Mr. Emms.

I haven't any connector for it, do you know where I could find them ? And also I would be happy if I could get the manual for it, as I have got it oem.

Cheers,

Matt.

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: GEMS DA36

Post by RickS » Tue Apr 15, 2008 9:10 am

Hi there,

Please email me through the contact us section of the website so i can send you the relavent software and information.

Many thanks

Ed

Xen
New User
Posts:6
Joined:Sat Mar 15, 2008 4:15 pm

Re: GEMS DA36

Post by Xen » Tue Apr 15, 2008 10:16 am

EdH wrote:Hi there,

Please email me through the contact us section of the website so i can send you the relavent software and information.

Many thanks

Ed
Hello,

Thank you very much for your answer, I just sent you a message through the contact us section of the website.

Best regards,

Matt. :)

Post Reply