DA3 Loger
Posted: Thu Jun 09, 2016 7:52 pm
I'm looking for info on how to configure the analog inputs on the DA3 for hall-effect wheel speed sensors. Aside from the DA3 spec sheet posted on the site is more info available? A manual maybe?
The manual is currently off-line as it's been rewritten but I'll help where I can.
I have attached a Quick-Start guide, which basically gives the Pin-Out and the meanings on the LEDs.
If you have the tech spec, you'll know that Analogue Inputs 1-4, correspond to Speed Inputs 1-4. Depending on what sensor you fit (Temp/Pressure or a speed) this will be configured what you create and upload the logger setup from the GEMS Data Analysis software (available from the GEMS website).
BR, RickS