DA3 Loger
Moderators:R!C0, JonMan, RickS
Re: DA3 Loger
The manual is currently off-line as it's been rewritten but I'll help where I can.
I have attached a Quick-Start guide, which basically gives the Pin-Out and the meanings on the LEDs.
If you have the tech spec, you'll know that Analogue Inputs 1-4, correspond to Speed Inputs 1-4. Depending on what sensor you fit (Temp/Pressure or a speed) this will be configured what you create and upload the logger setup from the GEMS Data Analysis software (available from the GEMS website).
BR, RickS
I have attached a Quick-Start guide, which basically gives the Pin-Out and the meanings on the LEDs.
If you have the tech spec, you'll know that Analogue Inputs 1-4, correspond to Speed Inputs 1-4. Depending on what sensor you fit (Temp/Pressure or a speed) this will be configured what you create and upload the logger setup from the GEMS Data Analysis software (available from the GEMS website).
BR, RickS
- Attachments
-
- DA3 Quick Start Guide Rev3.doc
- DA3 Quick Start Guide
- (127.5KiB)Downloaded 834 times