Page 1 of 1

Modify GIN/FIN files

Posted: Tue Jun 07, 2016 6:24 pm
by Carlz0r
Just wondering if there is any documentation and/or software available for modifying or at the very least reading the GIN and FIN files. I would like to dig a little deeper into it, specifically looking at whether or not I could possibly expand the fuel and spark map resolution.

Re: Modify GIN/FIN files

Posted: Wed Jul 20, 2016 2:14 pm
by RickS
Apologies for the delay, I'm not sure how this slipped through the net.

There are only a couple of personel here that can interrogate GIN and FIN files. GEMS decided long ago to keep this in house as it would make our support role impossible, if everybody started to design their own firmware.

If there is anything specific development that you require, then contact us through the Product Info portal in the Contact Us page and we will try to accomodate.

Best regards, Rick

Re: Modify GIN/FIN files

Posted: Wed Jul 20, 2016 2:18 pm
by RickS
Regarding the resolution of the maps that you mention, depending on the model and version of the ECU that you have, this can be changed through our GWv4 software.

Let me know what you have and I will let you know if it is possible with the kit that you have......

Best regards, RickS