Modify GIN/FIN files

Post here if you require technical information regarding a GEMS product

Moderators: R!C0, JonMan, RickS

Post Reply
Carlz0r
New User
Posts: 1
Joined: Tue Jun 07, 2016 6:19 pm

Modify GIN/FIN files

Post by Carlz0r » Tue Jun 07, 2016 6:24 pm

Just wondering if there is any documentation and/or software available for modifying or at the very least reading the GIN and FIN files. I would like to dig a little deeper into it, specifically looking at whether or not I could possibly expand the fuel and spark map resolution.

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: Modify GIN/FIN files

Post by RickS » Wed Jul 20, 2016 2:14 pm

Apologies for the delay, I'm not sure how this slipped through the net.

There are only a couple of personel here that can interrogate GIN and FIN files. GEMS decided long ago to keep this in house as it would make our support role impossible, if everybody started to design their own firmware.

If there is anything specific development that you require, then contact us through the Product Info portal in the Contact Us page and we will try to accomodate.

Best regards, Rick

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: Modify GIN/FIN files

Post by RickS » Wed Jul 20, 2016 2:18 pm

Regarding the resolution of the maps that you mention, depending on the model and version of the ECU that you have, this can be changed through our GWv4 software.

Let me know what you have and I will let you know if it is possible with the kit that you have......

Best regards, RickS

Post Reply