Gems AEM 15

Post here if you require technical information regarding a GEMS product

Moderators:R!C0, JonMan, RickS

Post Reply
ml283848
New User
Posts:3
Joined:Wed Mar 12, 2014 4:38 pm
Gems AEM 15

Post by ml283848 » Wed Mar 12, 2014 4:43 pm

Hi,
can anyone tell me if there still is a sw that can map a GEMS AEM15 36X2, s/n 31172 MOD Iss.B
Any information like pinout would be much appreciated.

Regards
Mikael

R!C0
Site Admin
Site Admin
Posts:230
Joined:Thu May 10, 2007 1:21 pm

Re: Gems AEM 15

Post by R!C0 » Wed Mar 12, 2014 7:15 pm

Hi Mikael,

You should be able to our standard GWv4 software.

If it still has the same firmware it had when is was here you will also need the attached GIN file to connect to it.

Regards
Attachments
AEM15GENV120.GIN
(262KiB)Downloaded 855 times

ml283848
New User
Posts:3
Joined:Wed Mar 12, 2014 4:38 pm

Re: Gems AEM 15

Post by ml283848 » Wed Mar 12, 2014 10:08 pm

Many thanks for the reply.

Is there any pin out drawing or manual still available?

Kind Regards

Mikael

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: Gems AEM 15

Post by RickS » Thu Mar 13, 2014 11:58 am

Hi Mikael,
I have come across this document in our archive, that will give you some pinout and jumper information.
I will dig a little deeper and also drop AEM a line to see if they have any further info that maybe of assistance.

Best regards,
Rick
Attachments
GEMS AEM15 36x2 adaptor ca.doc
GEMS/AEM15 2x36 Pin Connector Adaptor
(114.5KiB)Downloaded 900 times

ml283848
New User
Posts:3
Joined:Wed Mar 12, 2014 4:38 pm

Re: Gems AEM 15

Post by ml283848 » Mon Mar 17, 2014 10:15 am

Thanks,
Just what I needed.

Regrds

Mikael

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: Gems AEM 15

Post by RickS » Mon Mar 17, 2014 10:49 am

Your welcome.
If I can trace any more info, I'll post it here.

BR, Rick

Post Reply