Strain gauge logging with DA99

Post here if you require technical information regarding a GEMS product

Moderators:R!C0, JonMan, RickS

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am
Strain gauge logging with DA99

Post by RickS » Thu Jun 14, 2012 2:57 pm

The DA99 has 8 differential inputs.

The units are supplied with fixed gain of 1 (range 0-5 volt) but gains up to 100 (0-50mV or +/-50mV) are possible with a resistor change.

However this is not normally enough for direct connection to a strain gauge. We normally advise using a dedicated strain guage amp with a 0-5 volt output feeding into the unity gain differential amp.

Post Reply