MINIEMS Wiring Diagram

Post here if you require technical information regarding a GEMS product

Moderators:R!C0, JonMan, RickS

Post Reply
m166111
New User
Posts:2
Joined:Thu Sep 29, 2011 1:33 pm
MINIEMS Wiring Diagram

Post by m166111 » Thu Sep 29, 2011 1:45 pm

Hi

I've a BDG that was supplied with a MINIEMS ECU for ignition and Injector control. Does anyone have a wiring diagram or pinout diagram as anyone i've found does not include the RS232 comms outputs. The RS232 is wired to pins 10, 11 and 15 but I don't know which one is which. Ive got V3.16 of the software and the usb dongle.

Here's hoping someone can help

Regards Paul

R!C0
Site Admin
Site Admin
Posts:230
Joined:Thu May 10, 2007 1:21 pm

Re: MINIEMS Wiring Diagram

Post by R!C0 » Fri Sep 30, 2011 10:01 am

Pins should be as follows:

1- Injector
2 - Speed Sensor Power
3 - Rev Light Out
4 - Sensor Ground
5 - Throttle Position
6 - 5V Sensor Power
7 - Air Temp
8 - Igniter
9 - Speed Input
10 - Serial Transmit
11 - Serial Receive
12 - Coolant
13 - MAP/Baro
14 - 12V Power
15 - 0V Ground

HTH

m166111
New User
Posts:2
Joined:Thu Sep 29, 2011 1:33 pm

Re: MINIEMS Wiring Diagram

Post by m166111 » Fri Sep 30, 2011 4:14 pm

Thanks, Thats very helpful

Post Reply