Subaru
Posted: Fri May 28, 2010 3:50 pm
Hi,
I am the owner of a Gems Impreza PnP ECU STI v3/4 and an attached CDC PWM diff controller. The ecu is currently tuned to 99 octane for a rally application.
I had a look at the board the other day and the 3 pin plug broke off. The circuit board is ok, but for the future I want to solder 3 wires to the board and mount the connector remotely. Can you provide me with the orientation of the connector so that I can re-solder the connector?
Thanks, Greg in Canada
I am the owner of a Gems Impreza PnP ECU STI v3/4 and an attached CDC PWM diff controller. The ecu is currently tuned to 99 octane for a rally application.
I had a look at the board the other day and the 3 pin plug broke off. The circuit board is ok, but for the future I want to solder 3 wires to the board and mount the connector remotely. Can you provide me with the orientation of the connector so that I can re-solder the connector?
Thanks, Greg in Canada