Base Map Requests Here!

Post here if you have an issue with a GEMS Product

Moderators: R!C0, JonMan, RickS

R!C0
Site Admin
Site Admin
Posts: 229
Joined: Thu May 10, 2007 1:21 pm

Base Map Requests Here!

Post by R!C0 » Fri May 09, 2008 12:00 pm

Hi All,

As there have been a few, i've started this post for requesting base ecu maps. I will then upload base maps to the download section here

Please post in this thread and inlcude, product name and version, and if you have it, the serial number.

Also specify what kind of car, i.e rally, trackday.

*Edit* Thanks to Pete for the upload, others feel free to upload your own base maps!

Thanks

Rico

Pete
New User
Posts: 8
Joined: Wed May 23, 2007 10:51 pm

Re: Base Map Requests Here!

Post by Pete » Mon Jun 09, 2008 2:52 pm

EM20 RoverK G0.26
Rover K Series 1800 VHPD (Lotus Motorsport 190)
Titan/Lotus 45mm Throttle bodies
Single Coil and Distributor
Lotus Elise
Raceline Exhaust
3 bar fuel pressure
Cams timed at 106/109
Attachments
9june08_exp_.LOTUS RK.G0.26.cal
(4.11 KiB) Downloaded 902 times

DarrenElmslie
New User
Posts: 6
Joined: Thu Feb 05, 2009 2:55 pm

Duratec base map request

Post by DarrenElmslie » Sat Feb 07, 2009 10:04 pm

If anyone's got such a thing. I'd be desperate for a base map to let me run my newly-built engine up to temperature and get some confidence everything's fine before taking it to be mapped!

For info, the ECU would be
EM36

Engine would be
2.0L
ported head but standard valves
Jenvey 45s
3.7 bar fuel
Bosch 'green' injectors

Thanks in advance for any help!

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: Base Map Requests Here!

Post by RickS » Mon Feb 09, 2009 10:36 am

Hi,

We need to know things like the timing pattern and type of sensors you use. if these are standard then just the type of engine (i.e. Duratec) will do we might be able to help.

Thanks
Ed

DarrenElmslie
New User
Posts: 6
Joined: Thu Feb 05, 2009 2:55 pm

Re: Base Map Requests Here!

Post by DarrenElmslie » Mon Feb 09, 2009 3:03 pm

Thanks Ed!

My apologies I forgot to state that, yes, timing pattern and all sensors are standard.

If there's anything else you need, please let me know.

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: Base Map Requests Here!

Post by RickS » Mon Feb 09, 2009 3:18 pm

Hi,

Good to know things are standard that always makes it easier, But standard to what? what type of engine is it? K-Series, Duratec, Honda V-TEC etc. Once I know this i might be able to help.

Thanks
Ed

DarrenElmslie
New User
Posts: 6
Joined: Thu Feb 05, 2009 2:55 pm

Re: Base Map Requests Here!

Post by DarrenElmslie » Mon Feb 09, 2009 9:54 pm

Sorry Ed, It's an '06 Ford Duratec HE. I'd put Duratec in the post title but hadn't made a mention of it in the body. Standard ford trigger pattern, cams are Kent's D-TEC50 kit (296deg duration). I'm no longer using the cam-sensor for what that's worth.

R!C0
Site Admin
Site Admin
Posts: 229
Joined: Thu May 10, 2007 1:21 pm

Re: Base Map Requests Here!

Post by R!C0 » Tue Feb 10, 2009 8:32 pm

Hi Darren,

Attached to this message is a Duratec calibration for the latest version of EM36. It has been checked over and should be a good map for your application.
Attachments
Duratec DLS 36-1.EM36 .V0.89.cal
(13.04 KiB) Downloaded 864 times

DarrenElmslie
New User
Posts: 6
Joined: Thu Feb 05, 2009 2:55 pm

Re: Base Map Requests Here!

Post by DarrenElmslie » Wed Feb 11, 2009 9:13 pm

That's superb. Thanks a million Rico!

Looking forward now to getting the engine in and running, then I'll get the car over to Steve Greenald to work his magic on the rollers.

Thanks again and all the best,
Darren

jeanmi30
User
Posts: 21
Joined: Thu May 17, 2007 12:15 pm

Re: Base Map Requests Here!

Post by jeanmi30 » Thu Apr 23, 2009 9:05 am

Hi,
Can you send a base setup for DA1 logger fit in an IMPREZA WRC 2004 type S10?
Thanks

evosoh
User
Posts: 12
Joined: Mon Sep 24, 2007 4:23 pm

Re: Base Map Requests Here!

Post by evosoh » Thu Aug 06, 2009 3:15 pm

Hi,
Could you send me an EVO X map with aircon setup. I'm running the MAP sensor as load.
Thanks

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: Base Map Requests Here!

Post by RickS » Thu Aug 06, 2009 3:28 pm

Hi there,

Unfortunalty active air conditioning is something we are currently working on. We are short of an actual road car to try and work out how to activate it at the moment as it isn't as simple as a switch. As soon as we manage to get a road car in that we can work on we will be releasing a new version of firmware with airconditioning control.

Thanks
Ed

aong777
New User
Posts: 2
Joined: Fri Apr 23, 2010 10:31 pm

Re: Base Map Requests Here!

Post by aong777 » Fri Apr 23, 2010 11:23 pm

hi ,
I am use EM36 s/n 32670 model EM36 ACT version em36 00v89

my car peugeot 205 1400cc am change is 4 injector
crank index magnatic 60-2
no singal cam
ignition wavespake 1-4 ,2-3

thanks

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: Base Map Requests Here!

Post by RickS » Mon Apr 26, 2010 1:21 pm

Hi

Attached is a calibration for a 60-2 wasted spark engine with no cam sync but sequential injection. You may need to adjust ign offset until the spark is in the right place as normal. This calibration uses IGN 1 and IGN 2 and Fuel 1,2,3,4 pins. However the map is for a 1800cc engine so will need adjusting for your injector size. Right click on the fuel map and use the injector size adjuster to do this. Assume the fuel pressure is the same. I reccomend this map only for starting the engine. You should remap your engine before running it under any significant load.

Hope this helps
Ed
Attachments
60-2 was.EM36 .00V89.cal
(17.1 KiB) Downloaded 882 times

littlestevie
User
Posts: 16
Joined: Wed May 06, 2009 4:25 pm

Honda S2000 Base Map

Post by littlestevie » Mon Nov 29, 2010 3:38 pm

Hi,

I would like to request for a base map a 2008, 2.2L Honda S2000.

Thanks!

Post Reply