Traction Control

Post here if you have an issue with a GEMS Product

Moderators:R!C0, JonMan, RickS

Post Reply
markk
User
Posts:32
Joined:Sat Feb 05, 2011 5:34 pm
Traction Control

Post by markk » Sun Feb 05, 2017 5:38 pm

Hi,

I would like to try and take advantage of the traction control I have but have no settings at all other than what is in the manual as guidance.

Do you have any calibrations you could share that have the system working than I can derive my own setting from?

Thanks

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: Traction Control

Post by RickS » Tue Feb 07, 2017 9:32 am

I will have a delve in our archive and post anything that I find here.....
Is this for an EM36 or a different ECU..? Also, what version of firmware please...?
BR, RickS

markk
User
Posts:32
Joined:Sat Feb 05, 2011 5:34 pm

Re: Traction Control

Post by markk » Tue Feb 07, 2017 9:50 am

Hi Rick,

Yes EM36, 01V28.

Thanks
Mark

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: Traction Control

Post by RickS » Tue Feb 07, 2017 12:41 pm

Hi again Mark....
I had a search through the 01v28 cals that I have access to and when that came up dry, I had a look through the 00v89, which gave me the same result.

So, going through my O's and S's I cam up with a cal with some settings that look to be able to accomplish the task. I've created (and attached) an EM36 'Aspect' file, with the options and tables that should get you started..

A few notes on the settings.. i) this used Engine acceleration, so the Gear Ratio table will need to be set for your vehicle (EM36 manual explains how), ii) In the attached aspect, only Ignition Cut/Retard and Fuel Cut are controlled. Boost and
Wastegate are not controlled.

If the TC restrictions are too severe, raise the thresholds in the tables and/or lower the values in the Cut/Retard options.
BR, RickS
Attachments
EM36-TC.aspect
EM36 Traction Control Aspect file
(32.32KiB)Downloaded 632 times

markk
User
Posts:32
Joined:Sat Feb 05, 2011 5:34 pm

Re: Traction Control

Post by markk » Tue Feb 07, 2017 12:55 pm

Thanks Rick, ill have a play.

Regards
Mark

Post Reply