Subaru 44 G1.47
Moderators:R!C0, JonMan, RickS
-
- New User
- Posts:1
- Joined:Mon May 25, 2015 5:42 pm
Hello. I come from Poland.
I Have in my WRX.
What it needs to connect and use this Ecu
Ecu available Anti lag or Launch control??
What mods available on this Ecu??
Subaru 44 g1.47
Picture in file
I Have in my WRX.
What it needs to connect and use this Ecu
Ecu available Anti lag or Launch control??
What mods available on this Ecu??
Subaru 44 g1.47
Picture in file
- Attachments
-
- DSC09694.JPG (216.49KiB)Viewed 10201 times
Re: Subaru 44 G1.47
Hi Dawid,
The Subaru 44 'piggy-back' module was developed purely to give an enhancement for a tunable 'MAP as Load' facility and a decent Ignition Advance map.
There are no ALS or Launch option in the G1.47 setup that you have and this was the only publicly released version.
If you want to calibrate this ECU, you will need GWv4 calibration software (downloadable from our web-site), a 3 pin binder to USB communication cable and a licence 'dongle'. These last two items can be ordered from sales(at)gems.co.uk.
Finally you will need a .GIN file for the Subaru 44, which you can find in the 'Downloads' section of our website.
Hope that this helps....
RickS
The Subaru 44 'piggy-back' module was developed purely to give an enhancement for a tunable 'MAP as Load' facility and a decent Ignition Advance map.
There are no ALS or Launch option in the G1.47 setup that you have and this was the only publicly released version.
If you want to calibrate this ECU, you will need GWv4 calibration software (downloadable from our web-site), a 3 pin binder to USB communication cable and a licence 'dongle'. These last two items can be ordered from sales(at)gems.co.uk.
Finally you will need a .GIN file for the Subaru 44, which you can find in the 'Downloads' section of our website.
Hope that this helps....
RickS