Closed Loop OX FB Options
Moderators:R!C0, JonMan, RickS
What does the option OX Int +/- max control?
it appears to be defaulted to the same % as the OX FB +/- max.
Thanks.
it appears to be defaulted to the same % as the OX FB +/- max.
Thanks.
Re: Closed Loop OX FB Options
I guess that you are familiar with PID (Proportional-Integral-Derivative) controllers. These are used to control the difference between a measured process variable and a desired value, such as Lambda.
If you would tell me which ECU you have, I would be able to give you a definitive answer but what you have mentioned above is the integral value of this PID equation. There are descriptions of Options and Parameters in most of the manuals that we supply but if you need specific descriptions, please do not hesitate to ask.
Hope that this helps,
RickS
If you would tell me which ECU you have, I would be able to give you a definitive answer but what you have mentioned above is the integral value of this PID equation. There are descriptions of Options and Parameters in most of the manuals that we supply but if you need specific descriptions, please do not hesitate to ask.
Hope that this helps,
RickS
Re: Closed Loop OX FB Options
I have the EliseParts ECU based on the EM36.
Re: Closed Loop OX FB Options
Ah...OK.
The EP96 is a specifically built ECU built for the Elise and is marketted by Track-Group.
Many of the Options and Parameters are specific to that ECU, so it may be worth getiing the final word from Track-Group. I do not have any manuals for that product as it is supported by them.
I will help where I can but I think that your first port of call should be them.
BR
RickS
The EP96 is a specifically built ECU built for the Elise and is marketted by Track-Group.
Many of the Options and Parameters are specific to that ECU, so it may be worth getiing the final word from Track-Group. I do not have any manuals for that product as it is supported by them.
I will help where I can but I think that your first port of call should be them.
BR
RickS