Automapping
Moderators:R!C0, JonMan, RickS
Is it possible to use the automapping function, but only have the changes apply to a selected portion of the fuel map?
I don't want to change anything down low (low load/low rpm) on my fuel map.
Thanks,
David
I don't want to change anything down low (low load/low rpm) on my fuel map.
Thanks,
David
Re: Automapping
Certainly.
In the View|Log Maps (automapping)|Add Log Map Grid tab, you can left click and drag to select the sites you want to save. Once selected, right click on the grid and select Site locking|Lock Selected Sites.
Best regards and I hope that this helps.
RIckS
In the View|Log Maps (automapping)|Add Log Map Grid tab, you can left click and drag to select the sites you want to save. Once selected, right click on the grid and select Site locking|Lock Selected Sites.
Best regards and I hope that this helps.
RIckS