GEMS - General Engine Management Systems Ltd - Forum

Hi,

I have a customer with a Alfa 2.0 TS engine that should be mapped on the engine dyno this weekend.
We now found out that he do not have the software for the ecu. After searching the webpage we have found out that he might need to pay for the "new" G3 software.

I found a thread after searching this forum that stated there were a dos program available for free.

Anyone know where I can find this?


Fredrik Dahl
Power Department
NORWAY

Btw, the serial is 95X085 if that should help..

Good morning Fredrik,

What flavour of Windows are you running (?) as GEMSCOM can be unstable on later versions, which is why it is no longer suported, so you may have to use the newer version. To download, edit and upload calibrations into our ECUs, you need to be using either GWv3 (old version) or GWv4. The software is available to download from our website but you will need to purchase a licence dongle from us to be able to use it.

The licence can be ordered from sales (at) gems.co.uk .

BR
RickS

Hi.

I have several pc's available because of the variety of software for old and new ecus from different vendors.
So, Win 95, 98SE, 2000, XP etc etc, so if there is a version of gemscom that I can try for free to look into the igntion values in the ecu - that would be nice to have..

Fredrik,

Hi again Fredrik,
PM sent regarding the availability of GEMSCOM for DOS
BR
Rick