Page 1 of 1
ALS Switch on Impreza MY99
Posted: Mon Feb 06, 2012 10:12 pm
by Kristian
Hi
I have a Impreza MY99 with a GEMS v2.30 ECU. I want to able to connect a switch to disable/enable ALS/PBW. The manual states that I should use B03/pin#029. Does that mean that I will use pin 29 on the first connector (left seen from the drivers position?
Regards
Kristian
Re: ALS Switch on Impreza MY99
Posted: Tue Feb 07, 2012 9:52 pm
by Kristian
Figured it out, I had to connect it to the third pin on the second connector B03. The reference to "029" i do not understand, but I can live with that.
Re: ALS Switch on Impreza MY99
Posted: Thu Feb 09, 2012 10:54 am
by RickS
B03 is the correct assignment for ALS/PBW switch.
029 is the original Subaru pin assignment.
Regards,
RickS
Re: ALS Switch on Impreza MY99
Posted: Wed Feb 29, 2012 3:55 pm
by Kristian
Thank you for the clearification regarding the "029". Nice to know what it means.
Re: ALS Switch on Impreza MY99
Posted: Sun Apr 28, 2019 9:27 am
by Brothan
Hello, I have been fighting with a the als/launch switch for some hours now. Also have i MY99 but with Gems R plug and play ECU, if I check the switches #29 is on and if I connect a wire to the middle plug B03 and ground it switch #29 and switch #3 goes to "off" ?? Haven't had any luck to get als/pbw/launch activated no matte how i try?
Re: ALS Switch on Impreza MY99
Posted: Mon Apr 29, 2019 7:40 am
by RickS
Can you please send over a copy of the installed calibration, so that we can evaluate what version of firmware you are running with....
.... send to tech.support (@) gems.co.uk.
Regards, RickS