ALS Switch on Impreza MY99
Moderators:R!C0, JonMan, RickS
Hi
I have a Impreza MY99 with a GEMS v2.30 ECU. I want to able to connect a switch to disable/enable ALS/PBW. The manual states that I should use B03/pin#029. Does that mean that I will use pin 29 on the first connector (left seen from the drivers position?
Regards
Kristian
I have a Impreza MY99 with a GEMS v2.30 ECU. I want to able to connect a switch to disable/enable ALS/PBW. The manual states that I should use B03/pin#029. Does that mean that I will use pin 29 on the first connector (left seen from the drivers position?
Regards
Kristian
Re: ALS Switch on Impreza MY99
Figured it out, I had to connect it to the third pin on the second connector B03. The reference to "029" i do not understand, but I can live with that.
Re: ALS Switch on Impreza MY99
B03 is the correct assignment for ALS/PBW switch.
029 is the original Subaru pin assignment.
Regards,
RickS
029 is the original Subaru pin assignment.
Regards,
RickS
Re: ALS Switch on Impreza MY99
Thank you for the clearification regarding the "029". Nice to know what it means.
Re: ALS Switch on Impreza MY99
Hello, I have been fighting with a the als/launch switch for some hours now. Also have i MY99 but with Gems R plug and play ECU, if I check the switches #29 is on and if I connect a wire to the middle plug B03 and ground it switch #29 and switch #3 goes to "off" ?? Haven't had any luck to get als/pbw/launch activated no matte how i try?
Re: ALS Switch on Impreza MY99
Can you please send over a copy of the installed calibration, so that we can evaluate what version of firmware you are running with....
.... send to tech.support (@) gems.co.uk.
Regards, RickS
.... send to tech.support (@) gems.co.uk.
Regards, RickS