ALS Switch on Impreza MY99

Post here if you have an issue with a GEMS Product

Moderators: R!C0, JonMan, RickS

Post Reply
Kristian
New User
Posts: 6
Joined: Fri Nov 04, 2011 8:38 pm

ALS Switch on Impreza MY99

Post by Kristian » Mon Feb 06, 2012 10:12 pm

Hi

I have a Impreza MY99 with a GEMS v2.30 ECU. I want to able to connect a switch to disable/enable ALS/PBW. The manual states that I should use B03/pin#029. Does that mean that I will use pin 29 on the first connector (left seen from the drivers position?

Regards
Kristian

Kristian
New User
Posts: 6
Joined: Fri Nov 04, 2011 8:38 pm

Re: ALS Switch on Impreza MY99

Post by Kristian » Tue Feb 07, 2012 9:52 pm

Figured it out, I had to connect it to the third pin on the second connector B03. The reference to "029" i do not understand, but I can live with that.

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: ALS Switch on Impreza MY99

Post by RickS » Thu Feb 09, 2012 10:54 am

B03 is the correct assignment for ALS/PBW switch.

029 is the original Subaru pin assignment.

Regards,
RickS

Kristian
New User
Posts: 6
Joined: Fri Nov 04, 2011 8:38 pm

Re: ALS Switch on Impreza MY99

Post by Kristian » Wed Feb 29, 2012 3:55 pm

Thank you for the clearification regarding the "029". Nice to know what it means.

Brothan
New User
Posts: 1
Joined: Sun Apr 28, 2019 9:15 am

Re: ALS Switch on Impreza MY99

Post by Brothan » Sun Apr 28, 2019 9:27 am

Hello, I have been fighting with a the als/launch switch for some hours now. Also have i MY99 but with Gems R plug and play ECU, if I check the switches #29 is on and if I connect a wire to the middle plug B03 and ground it switch #29 and switch #3 goes to "off" ?? Haven't had any luck to get als/pbw/launch activated no matte how i try?

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts: 542
Joined: Thu May 17, 2007 11:38 am

Re: ALS Switch on Impreza MY99

Post by RickS » Mon Apr 29, 2019 7:40 am

Can you please send over a copy of the installed calibration, so that we can evaluate what version of firmware you are running with....
.... send to tech.support (@) gems.co.uk.

Regards, RickS

Post Reply