MAp Subaru2002 S2.66

Post here if you have an issue with a GEMS Product

Moderators:R!C0, JonMan, RickS

Post Reply
dsmotorsport
User
Posts:13
Joined:Sat Jan 03, 2009 2:14 pm
MAp Subaru2002 S2.66

Post by dsmotorsport » Fri Aug 21, 2009 9:48 am

Hi, i need an gpN map or a map with ALS because my map don´t have some boost in als mode.

Thanks

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: MAp Subaru2002 S2.66

Post by RickS » Tue Aug 25, 2009 3:59 pm

Attached is the base cal you require. There are some details on tuning the antilag in the manual. Most of the ALS tuning is done using the TPS Retard Map.

Hope this helps
Ed
Attachments
N10_Subaru_SUL.Subaruk2.S2.66.cal
(11.88KiB)Downloaded 854 times

dsmotorsport
User
Posts:13
Joined:Sat Jan 03, 2009 2:14 pm

Re: MAp Subaru2002 S2.66

Post by dsmotorsport » Wed Aug 26, 2009 7:28 pm

Thanks Ed,
i don´t have a manual for the 2.66 or is it the same as the 2.61?

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: MAp Subaru2002 S2.66

Post by RickS » Thu Aug 27, 2009 11:05 am

Hi,

Yes it is mostly the same, i need to update that manual soon.

Hope this helps
Ed

dsmotorsport
User
Posts:13
Joined:Sat Jan 03, 2009 2:14 pm

Re: MAp Subaru2002 S2.66

Post by dsmotorsport » Fri Aug 28, 2009 8:05 am

hy ed
how will work the lambda and the knock when we drive the car without als because on the 4th the piston rings are broken?

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: MAp Subaru2002 S2.66

Post by RickS » Fri Aug 28, 2009 2:47 pm

Hi,

I'm not sure i understand the question but Lambda FB and Knock control can be made to work when driving the car around yes.

Hope this helps
Ed

dsmotorsport
User
Posts:13
Joined:Sat Jan 03, 2009 2:14 pm

Re: MAp Subaru2002 S2.66

Post by dsmotorsport » Fri Aug 28, 2009 3:08 pm

in the n10 basemap are parameters for lambda and knock or not?

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: MAp Subaru2002 S2.66

Post by RickS » Fri Aug 28, 2009 3:20 pm

Hi,

Yes you do have the parameters knock and Lambda. It is more interesting to view Knock raw though when setting up knock control as this is the value that is entered into the Knock table.

Hope this helps
Ed

Post Reply