Page 1 of 1
Subaru 2002 S2.66 BoostProblem
Posted: Mon Aug 17, 2009 9:26 am
by dsmotorsport
Hello, we get back our serviced ECU and i have only 159kpa boost but we are driving 200kpa boost also the car dont use the full boost mode. i can change everything in the wastegatemap but ther is no changing on the boost gauge and in the pbw mode i dont get some boost. What can be wrong?
Re: Subaru 2002 S2.66 BoostProblem
Posted: Mon Aug 17, 2009 9:33 am
by RickS
Hi,
Set the option WG Feedback to OFF and set the Waste gate map to both 0 % and 100%. check the wastegate is moving it's full length when you run the car at several RPM'S.
Hope this helps
Ed
Re: Subaru 2002 S2.66 BoostProblem
Posted: Fri Aug 21, 2009 9:37 am
by dsmotorsport
Hy ed wastegate works fine. the problem was the restrictor i don t know why but i orderd an other one for gpN. without restrictor i v 198 kpa boost thanks.