dlog97 for dlog94 error in VMMAPPER

Post here if you have an issue with a GEMS Product

Moderators:R!C0, JonMan, RickS

jeanmi30
User
Posts:21
Joined:Thu May 17, 2007 12:15 pm
dlog97 for dlog94 error in VMMAPPER

Post by jeanmi30 » Thu Jul 26, 2007 1:35 pm

Hi,
After changing my hard disk drive, I could not make working again my "dlog97 for dlog94". My laptop is whith "windows 98" os and during the MSdos startup page, an error in VMMAPPER is announced.
If I run "PCCardsetup.exe" the error log is : "!!Error21 'function not supported' while checking clients"
Alls the files usualy need are in place (in windows/system/ "vmmapper.exe, CSmapper.sys, carddrv.exe, CSL_CS.dll) and the config.sys & autoexe.bat are like they explain in help file.
What can I do?
For information, this program was working well before in the same laptop but whith the old hard dick.

Thanks to help me
Best Regards[/b]

JonMan
GEMS Engineer
GEMS Engineer
Posts:5
Joined:Thu May 10, 2007 3:18 pm

Post by JonMan » Fri Jul 27, 2007 1:29 pm

I think this may be because you need to turn on 32 bit card support before using this software.

Unfortunately, we don't have a functioning Windows 98 computer any more, so I'm can't confirm if the following steps will work.

Go into the windows control panel. You should see a PC Card icon. Double click on this icon - if I remember correctly, it will then prompt to install 32 bit card support. Click OK where appropriate.

Let me know if this fixes it. If not, there may be an alternative method using a VxD we developed.

Best regards,

Jon.

jeanmi30
User
Posts:21
Joined:Thu May 17, 2007 12:15 pm

Post by jeanmi30 » Mon Aug 13, 2007 4:06 pm

Hi,
He seems that my laptop is yet configure in 32bits pc card mode ( and compatible Ms Dos )
The error message when trying to read a card is :"read beyon end of file"
I also dispose of the release 1.36 of "dlog97 for dlog94" that I think it's your VXD solution and in this case the message is : "error loading VXD"
All the Windows card drivers are same as in my old hard disk. I have check succefully my PCMCIA card in other laptop.
What can I do?

JonMan
GEMS Engineer
GEMS Engineer
Posts:5
Joined:Thu May 10, 2007 3:18 pm

Post by JonMan » Thu Aug 16, 2007 10:22 am

I've emailed you a copy of the Vxd in case it wasn't properly installed.

Let me know if you don't get it as some email programs remove these attachements.

jeanmi30
User
Posts:21
Joined:Thu May 17, 2007 12:15 pm

Post by jeanmi30 » Mon Aug 20, 2007 9:31 pm

Thanks a lot for your help.
"Gemsram.VXD" was missing in the "Windows/system" directory.
Now evrything work fine!:lol: :lol:

Best regards

Frédo RIVIERE
New User
Posts:1
Joined:Wed Apr 09, 2008 6:48 pm

Re: dlog97 for dlog94 error in VMMAPPER

Post by Frédo RIVIERE » Wed Apr 09, 2008 6:57 pm

Hi,
I'm sorry, but I have the same problem with my laptop Gemsram.vxd is missing to windows/system

Can you help me, please ?

Best regard's !!!

Frédéric RIVIERE (P161EUD)

JonMan
GEMS Engineer
GEMS Engineer
Posts:5
Joined:Thu May 10, 2007 3:18 pm

Re: dlog97 for dlog94 error in VMMAPPER

Post by JonMan » Thu Apr 10, 2008 1:10 pm

Please find attached the required file.
Attachments

[The extension vxd has been deactivated and can no longer be displayed.]


mart0398
New User
Posts:7
Joined:Tue Oct 22, 2019 8:36 pm

Re: dlog97 for dlog94 error in VMMAPPER

Post by mart0398 » Tue Oct 22, 2019 8:42 pm

I apologise for reopening such an old thread, however i am trying to get "dlog97 for dlog94" working on a newly installed windows 98 machine from a backup, however i am receiving the message "Failed to load GEMSRAM.VXD". I have checked the Windows\System directory as discussed here and the file is missing. Would it be possible to download it from somewhere?
Many thanks

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: dlog97 for dlog94 error in VMMAPPER

Post by RickS » Wed Oct 23, 2019 8:04 am

I have searched our archive and can't find that file...
Do you mean "GEMSSRAM.vxd" (double 'S')..?

As it's a .VXD file, it's a Virtual Device Driver, so I won't be able to attach it here (Forum limitations..!). I doubt that I will be able to eMail it to you either, as many IPs object to this type of file. If it what you're after, I'll pop it into a 'dropbox' and you can scoop it up from there.
Regards, RickS

mart0398
New User
Posts:7
Joined:Tue Oct 22, 2019 8:36 pm

Re: dlog97 for dlog94 error in VMMAPPER

Post by mart0398 » Fri Oct 25, 2019 1:34 pm

Apologies, you are correct with double s. Thanks for your help. Drop box it great.
Off the top of your head, do you know how new an os would support the SRAM cards plugged into laptop PCMCIA slots?

Kind regards
Martin
Attachments
20191025_133049.jpg
20191025_133049.jpg (110.5KiB)Viewed 20009 times

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: dlog97 for dlog94 error in VMMAPPER

Post by RickS » Fri Oct 25, 2019 2:10 pm

Link sent to eMail address that we hold for you.
Re. the SRAM cards and PCMCIA slots on new operating systems, I really am not sure.
I will have a word with our Technical Director as he tends to look after all of the GEMS 'Legacy' kit. He might be able to throw some light on this and I'll post his responses here (will be next week, as he's not in today..!).
I do know that there are only certain cards that he will recommend with our kit, as not all give favourable results, apparently.

Regards, RickS...

mart0398
New User
Posts:7
Joined:Tue Oct 22, 2019 8:36 pm

Re: dlog97 for dlog94 error in VMMAPPER

Post by mart0398 » Wed Oct 30, 2019 8:31 pm

Hi Rick, have you sent the link? I don't appear to have received it yet?
Thanks

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: dlog97 for dlog94 error in VMMAPPER

Post by RickS » Thu Oct 31, 2019 8:22 am

Yes, sent to "mart0389" on a 'Yahoo account' - 5 days ago.

Can you let me know what logger you are using (serial number would also help.!).
I'm not sure whether you will have any joy with reading an SRAM card with an operating system later than XP.
I know that we have had to resort to using adaptors(OmniDrive USB2 for example) and not the cheap £10 from eBay either.

Other forum users may have better information than me on this, as it's not my immediate area of expertise..!
Regards....

mart0398
New User
Posts:7
Joined:Tue Oct 22, 2019 8:36 pm

Re: dlog97 for dlog94 error in VMMAPPER

Post by mart0398 » Fri Nov 01, 2019 6:25 pm

Hi Rick, email should have been mart0398 not 0389?
IAnyhow, I've changed my registered email address to another incase it was blocked.
Will look for serial no on Saturday, however its in an ex works 1997 wrc impreza.
Many thanks
Martin

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: dlog97 for dlog94 error in VMMAPPER

Post by RickS » Mon Nov 04, 2019 8:45 am

Apologies -Has now been resent....
Rick

Post Reply