Ignition Coil
Posted: Mon Feb 16, 2009 12:00 pm
Hi,
I have a K implant and am running G0.26, using a distributor and single coil. I want to replace the coil with a sport coil and wanted to know whether I should be looking for a low impedance (0.5ohm) or high impedance (3ohm) coil? For use up to 8500 RPM, I assume coil charge time is very limited at this speed. Is there a particular coil type I should be looking at or something you would recomend. Bosch or MSD Blaster.
Pete
I have a K implant and am running G0.26, using a distributor and single coil. I want to replace the coil with a sport coil and wanted to know whether I should be looking for a low impedance (0.5ohm) or high impedance (3ohm) coil? For use up to 8500 RPM, I assume coil charge time is very limited at this speed. Is there a particular coil type I should be looking at or something you would recomend. Bosch or MSD Blaster.
Pete