escort Cosworth ECU P8 Gem's

Use this forum to discuss all things GEMS.

Moderators:R!C0, JonMan, RickS

Post Reply
mecatech30
New User
Posts:2
Joined:Thu Jul 03, 2014 5:43 pm
escort Cosworth ECU P8 Gem's

Post by mecatech30 » Thu Jul 03, 2014 5:52 pm

hi

i buy an escort cosworth Group A with OE ECU Modified by Gems and motor loom too.

the seller Give to me an Old PC to map the ECU P8

On the ecu box there wrote : FORDF-8D/130
on the ECU Chips there wrote: FORDP8D G2.02.

Can you help me to know witch program and maybe how to do

thank you

( sorry for y bad english written, i'm french)

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: escort Cosworth ECU P8 Gem's

Post by RickS » Fri Jul 04, 2014 9:46 am

Bonjour,
Vous pouvez calibrer l'ECU avec notre logiciel GWv4 que vous pouvez télécharger à partir de notre site Web. Vous serez en mesure de se connecter à l'ECU si vous avez un fichier approprié .GIN, que vous pouvez également télécharger à partir de notre site Web.

Ce que le vendeur vous donne un câble de communication et un petit (probablement vert) licence «dongle» avec l'ancien PC / Laptop ..? Le dongle ressemble à un lecteur flash USB. Sans cela, vous ne serez pas en mesure de se connecter à l'ECU.

S'il vous plaît envoyer des photos à tech.support (at) gems.co.uk montrant le connecteur, de sorte que je puisse mieux vous conseiller sur le câble dont vous avez besoin.

Cordialement,
RickS (GEMS Tech Support) S'il vous plaît excuser mon français. Tout droit sorti de "Google Translate" ..!

Good morning,
You can calibrate the ECU with our GWv4 software that you can download from our website. You will be able to connect to the ECU if you have an appropriate .GIN file, which you can also download from our website.

Did the seller give you a communication cable and a small (probably green) licence ‘dongle’ with the old PC/laptop..? The dongle will look like a USB flash drive. Without this, you will not be able to connect to the ECU.

Please send some photos to tech.support (at) gems.co.uk showing the connector, so that I can better advise you on the cable that you require.

Best regards,
RickS (GEMS Tech Support)

mecatech30
New User
Posts:2
Joined:Thu Jul 03, 2014 5:43 pm

Re: escort Cosworth ECU P8 Gem's

Post by mecatech30 » Mon Jul 07, 2014 4:55 pm

hi

thank you for your quikly answer

i just write to gem's support.

i hope i will have all tool and information about you to map my ECU

many thank !!

User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am

Re: escort Cosworth ECU P8 Gem's

Post by RickS » Tue Jul 08, 2014 9:58 am

No problem.....
Have replied to your email.....
RickS

Post Reply