I get the error message: "Card not present ..."

GEMS data aquisition software DLOG

Moderators:R!C0, JonMan, RickS

Locked
R!C0
Site Admin
Site Admin
Posts:230
Joined:Thu May 10, 2007 1:21 pm
I get the error message: "Card not present ..."

Post by R!C0 » Fri Feb 08, 2008 6:26 pm

Q: I get the error message: "Card not present or formatted. Format cards in data logger before use."

A: Check correct PCMCIA slot is selected and active. Config > Options > PCMCIA (Tab) > Select mapped slot and select as active. Check correct logger type is selected. Config > Logger > Select logger

Locked