Common EM80 Setup queries

Questions relalting to all engine GEMS ECUs

Moderators:R!C0, JonMan, RickS

Locked
User avatar
RickS
GEMS Engineer
GEMS Engineer
Posts:547
Joined:Thu May 17, 2007 11:38 am
Common EM80 Setup queries

Post by RickS » Wed Oct 19, 2016 2:08 pm

There follows a list of small documents for helping setup the EM80 generic ECU.
The list and its contents will be added to and amended as required...
Attachments
12 Active Throttle.doc
Setting up an Active Throttle
(65.5KiB)Downloaded 911 times
11 Variable Valve Timing.doc
Basic VVT / VVC control
(84KiB)Downloaded 893 times
10 Lambda or Oxygen Feedback.doc
Lambda feedback and control
(41.5KiB)Downloaded 942 times
09 Ignition.doc
Mapping the basic ignition requirements
(143KiB)Downloaded 928 times
08 Fuelling.doc
Mapping the basis fuelling requirements
(103KiB)Downloaded 966 times
07 Anti-Lag and Torque reduction.doc
Anti-Lag and other torque reduction techniques
(281.5KiB)Downloaded 920 times
06 Idle Control.doc
Controlling the Idle spped
(78.5KiB)Downloaded 908 times
05 Load Sensing.doc
Pedal, MAP or MAF as load
(26.5KiB)Downloaded 917 times
04 Tooth Control & Engine Speed.doc
Tooth Control tables and syncing.
(764.5KiB)Downloaded 886 times
03 Inputs & Outputs.doc
I/O (Timed, PWM, Speed and Analogue)
(117KiB)Downloaded 896 times
02 Quick Start.doc
Quick guide for those familiar with GEMS strategies
(229KiB)Downloaded 947 times
01 Features & Setup.doc
List of features, pin-out and initial setup hints and tips
(197.5KiB)Downloaded 968 times

Locked