Common EM80 Setup queries
Moderators:R!C0, JonMan, RickS
There follows a list of small documents for helping setup the EM80 generic ECU.
The list and its contents will be added to and amended as required...
The list and its contents will be added to and amended as required...
- Attachments
-
- 12 Active Throttle.doc
- Setting up an Active Throttle
- (65.5KiB)Downloaded 1091 times
-
- 11 Variable Valve Timing.doc
- Basic VVT / VVC control
- (84KiB)Downloaded 1071 times
-
- 10 Lambda or Oxygen Feedback.doc
- Lambda feedback and control
- (41.5KiB)Downloaded 1103 times
-
- 09 Ignition.doc
- Mapping the basic ignition requirements
- (143KiB)Downloaded 1096 times
-
- 08 Fuelling.doc
- Mapping the basis fuelling requirements
- (103KiB)Downloaded 1139 times
-
- 07 Anti-Lag and Torque reduction.doc
- Anti-Lag and other torque reduction techniques
- (281.5KiB)Downloaded 1080 times
-
- 06 Idle Control.doc
- Controlling the Idle spped
- (78.5KiB)Downloaded 1097 times
-
- 05 Load Sensing.doc
- Pedal, MAP or MAF as load
- (26.5KiB)Downloaded 1095 times
-
- 04 Tooth Control & Engine Speed.doc
- Tooth Control tables and syncing.
- (764.5KiB)Downloaded 1055 times
-
- 03 Inputs & Outputs.doc
- I/O (Timed, PWM, Speed and Analogue)
- (117KiB)Downloaded 1078 times
-
- 02 Quick Start.doc
- Quick guide for those familiar with GEMS strategies
- (229KiB)Downloaded 1109 times
-
- 01 Features & Setup.doc
- List of features, pin-out and initial setup hints and tips
- (197.5KiB)Downloaded 1143 times