Common EM80 Setup queries
Moderators:R!C0, JonMan, RickS
There follows a list of small documents for helping setup the EM80 generic ECU.
The list and its contents will be added to and amended as required...
The list and its contents will be added to and amended as required...
- Attachments
-
- 12 Active Throttle.doc
- Setting up an Active Throttle
- (65.5KiB)Downloaded 1189 times
-
- 11 Variable Valve Timing.doc
- Basic VVT / VVC control
- (84KiB)Downloaded 1174 times
-
- 10 Lambda or Oxygen Feedback.doc
- Lambda feedback and control
- (41.5KiB)Downloaded 1210 times
-
- 09 Ignition.doc
- Mapping the basic ignition requirements
- (143KiB)Downloaded 1196 times
-
- 08 Fuelling.doc
- Mapping the basis fuelling requirements
- (103KiB)Downloaded 1236 times
-
- 07 Anti-Lag and Torque reduction.doc
- Anti-Lag and other torque reduction techniques
- (281.5KiB)Downloaded 1191 times
-
- 06 Idle Control.doc
- Controlling the Idle spped
- (78.5KiB)Downloaded 1183 times
-
- 05 Load Sensing.doc
- Pedal, MAP or MAF as load
- (26.5KiB)Downloaded 1197 times
-
- 04 Tooth Control & Engine Speed.doc
- Tooth Control tables and syncing.
- (764.5KiB)Downloaded 1167 times
-
- 03 Inputs & Outputs.doc
- I/O (Timed, PWM, Speed and Analogue)
- (117KiB)Downloaded 1175 times
-
- 02 Quick Start.doc
- Quick guide for those familiar with GEMS strategies
- (229KiB)Downloaded 1206 times
-
- 01 Features & Setup.doc
- List of features, pin-out and initial setup hints and tips
- (197.5KiB)Downloaded 1238 times