CAN Telemetry and Bus creation
Posted: Tue Apr 14, 2020 1:48 pm
Setting up CAN Telemetry in '80' series GEMS ECUs
The '80' series GEMS ECUs, can have their CAN bus transmissions setup via the GWv4 calibration software. This can be actioned by selecting the 'Telemetry' tab at the top of the GWv4 workspace, once you have opened your calibration and then selecting the 'CAN Telemetry Setup' feature.
This will then display a panel, where you can select the parameters that you wish to put onto the CAN bus, the CAN bus speed and the rate that you want to dispatch the packets of data in their defined arbitration codes. See the attached document for further details....
The '80' series GEMS ECUs, can have their CAN bus transmissions setup via the GWv4 calibration software. This can be actioned by selecting the 'Telemetry' tab at the top of the GWv4 workspace, once you have opened your calibration and then selecting the 'CAN Telemetry Setup' feature.
This will then display a panel, where you can select the parameters that you wish to put onto the CAN bus, the CAN bus speed and the rate that you want to dispatch the packets of data in their defined arbitration codes. See the attached document for further details....