Resizing Petrol Injectors
Moderators:R!C0, JonMan, RickS
You can change the size of your injectors by using GWv4...
If you open the [Fuel] grid or graph and "right click" on it, you will see the following panel.
Now "left click" on the "Fuel Map Functions" option and select "Change Injectors/Pressure" Next, you will now see a panel that allows you to select the current flow rate and input a new flow rate. We would suggest that although this is an excellent "starting point", you should always get the motor re-mapped when changing injectors as if it is running too 'lean' you could seriously damage your motor.!!!!
If you open the [Fuel] grid or graph and "right click" on it, you will see the following panel.
Now "left click" on the "Fuel Map Functions" option and select "Change Injectors/Pressure" Next, you will now see a panel that allows you to select the current flow rate and input a new flow rate. We would suggest that although this is an excellent "starting point", you should always get the motor re-mapped when changing injectors as if it is running too 'lean' you could seriously damage your motor.!!!!