Map sensor faulty...
Moderators:R!C0, JonMan, RickS
Q: Is there any map default if Map sensor is faulty and what would be best value?
A: If the parameter Error MAP = On, and option MAP = On, then the TPS to Load table is activated, unfortunately with this ECU it is not possible to default to Air Flow. Best thing to do is to log Throttle and Engine load and use the Dlog99 X-Y plot over a typical part of the driving range to estimate the shape of the TPS to Load table.
A: If the parameter Error MAP = On, and option MAP = On, then the TPS to Load table is activated, unfortunately with this ECU it is not possible to default to Air Flow. Best thing to do is to log Throttle and Engine load and use the Dlog99 X-Y plot over a typical part of the driving range to estimate the shape of the TPS to Load table.