How do you set the gear table ratios?

Mitsubishi EVO plug n play ECU FAQ's

Moderators:R!C0, JonMan, RickS

Locked
R!C0
Site Admin
Site Admin
Posts:230
Joined:Thu May 10, 2007 1:21 pm
How do you set the gear table ratios?

Post by R!C0 » Tue Jan 22, 2008 11:31 am

Gear is determined by the ratio of Engine Speed and Road Speed ( AKA VSS).

The Gear ratio table holds the nominal upper and lower bounds for this Gear Ratio for each of the gears, then shown in Gear parameter. Again logging of Gear Ratio is used to detect these ranges. Once Gear is determined subtle corrections fuel, Boost, and ignition may be applied. Also the Traction control feature may be activated, but this is probably only useful on tarmac surfaces.

Locked