Faulty Map sensor...

Mitsubishi EVO plug n play ECU FAQ's

Moderators:R!C0, JonMan, RickS

Locked
R!C0
Site Admin
Site Admin
Posts:230
Joined:Thu May 10, 2007 1:21 pm
Faulty Map sensor...

Post by R!C0 » Tue Jan 22, 2008 11:30 am

Q: Is there any map default if Map sensor is faulty and what would be best value?

A: If the parameter Error MAP = On, and option MAP = On, then the TPS to Load table is activated, unfortunately with this ECU it is not possible to default to Air Flow. Best thing to do is to log Throttle and Engine load and use the Dlog99 X-Y plot over a typical part of the driving range to estimate the shape of the TPS to Load table.

Locked