The DA1 never stops logging

DA1 datalogger

Moderators:R!C0, JonMan, RickS

Locked
R!C0
Site Admin
Site Admin
Posts:230
Joined:Thu May 10, 2007 1:21 pm
The DA1 never stops logging

Post by R!C0 » Mon Jan 21, 2008 4:16 pm

* Check the stop conditions are set correctly.
* Check the start condition is not valid at the same time as the stop condition.
* The DA1 logs for two seconds after the stop conditions are met, if during this time the start conditions are again met, then the DA1 will continue logging.
* Check the beacon is not set as a start AND stop condition.

Locked