The DA1 never stops logging
Posted: Mon Jan 21, 2008 4:16 pm
* Check the stop conditions are set correctly.
* Check the start condition is not valid at the same time as the stop condition.
* The DA1 logs for two seconds after the stop conditions are met, if during this time the start conditions are again met, then the DA1 will continue logging.
* Check the beacon is not set as a start AND stop condition.
* Check the start condition is not valid at the same time as the stop condition.
* The DA1 logs for two seconds after the stop conditions are met, if during this time the start conditions are again met, then the DA1 will continue logging.
* Check the beacon is not set as a start AND stop condition.