The Green LED comes on, but there is no log

DA1 datalogger

Moderators:R!C0, JonMan, RickS

Locked
R!C0
Site Admin
Site Admin
Posts:230
Joined:Thu May 10, 2007 1:21 pm
The Green LED comes on, but there is no log

Post by R!C0 » Mon Jan 21, 2008 4:16 pm

* Make sure that the Outputs in the setup file have record rates. i.e. All of them aren't set to No Record.
* Make sure that the CAN arbitration codes in the Input tab are correct.
* If logging only a byte in a CAN word, make sure that the correct byte is being logged. i.e. The top is being logged and not the bottom byte. Or the other way around.
* Make sure the logging time is more than 8 min.
* The serial data is not being logged. Make sure the correct Serial Protocol is selected.
* If it's a GEMS or Pectel/GEMS Protocol, make sure the correct Serial Size is specified. Make sure the correct Serial Speed is specified.

Locked