Search found 227 matches
- Mon Jan 21, 2008 3:45 pm
- Forum: GWv3
- Topic: Q: I downloaded GWv3, but it does not allow me to connect
- Replies: 0
- Views: 8008
- Thu Jan 17, 2008 7:55 pm
- Forum: Technical Support
- Topic: subaru sti ait sensor
- Replies: 10
- Views: 18966
Re: subaru sti ait sensor
In your options list, check Air temp max and Air Temp Min. Are those valid values?
- Mon Jan 14, 2008 6:39 pm
- Forum: Technical Support
- Topic: subaru sti ait sensor
- Replies: 10
- Views: 18966
Re: subaru sti ait sensor
Sorry to give you information on the later Ecu’s but I missed your comment about V2.60. The Air temp on this version of ecu is on Pin B27 for the signal element. There is a raw parameter called ADR6 which should read 64-65000 open circuit 39000 at 13 deg hopefully you have used pin D14 rather than B...
- Wed Jan 02, 2008 3:01 pm
- Forum: Technical Support
- Topic: subaru sti ait sensor
- Replies: 10
- Views: 18966
Re: subaru sti ait sensor
Hi, apologies for the delay, we have been closed for the christmas period. The Subaru 05 Ecu has 2 inputs on our unit for Air temp Pin B27 Air Temp AIT Source AIT 06 or Pin D15 Ptemp AIT Source15. IF you call up ADR06 and ADR15 in the Parameter window you should see one of these input changes with A...
- Fri Sep 28, 2007 10:07 am
- Forum: Technical Support
- Topic: help
- Replies: 5
- Views: 12780
If you do not have the GIN file it is available here: http://gems.co.uk/?content=pages&id=gin-files
To install it, follow the instructions here: http://gems.co.uk/forum/viewtopic.php?f=11&t=34
To install it, follow the instructions here: http://gems.co.uk/forum/viewtopic.php?f=11&t=34
- Thu Sep 06, 2007 11:08 am
- Forum: Technical Support
- Topic: MDLS pinout needed
- Replies: 2
- Views: 8351
PIN FUNCTION 1 - ignition output to second coil 2 - Hall/Opto power a nominal 12 volt output 3 - LED TACHO output may drive 4 watt 12 volt filament lamp 4 - Analogue ground for sensors 5 - Throttle pot wiper input 6 - Sensor power a nominal 5.0 volt output 7 - Air temperature sensor input 8 - Igniti...
- Thu Sep 06, 2007 10:21 am
- Forum: Technical Support
- Topic: PC - ECU comms problem
- Replies: 11
- Views: 22124
- Mon Sep 03, 2007 10:38 am
- Forum: Technical Support
- Topic: PC - ECU comms problem
- Replies: 11
- Views: 22124
- Tue Aug 28, 2007 5:31 pm
- Forum: Technical Support
- Topic: PC - ECU comms problem
- Replies: 11
- Views: 22124
- Thu Aug 02, 2007 10:06 am
- Forum: Technical Support
- Topic: Boost Target Map
- Replies: 8
- Views: 17835
- Tue May 29, 2007 5:39 pm
- Forum: Technical Support
- Topic: Uploading setup in old DA10 loggers
- Replies: 2
- Views: 8587
Hi jeanmi, The problem comes from DISP being a very old DOS program . It is incapable of running properly under windows XP. One solution we have used in the past is to system format a floppy drive with DISP files on and the run from there just for the setup upload. Its very clunky but will work. To ...
- Fri May 25, 2007 11:57 am
- Forum: Technical Information
- Topic: K Implant DFCO parameters
- Replies: 5
- Views: 16725
Pete,
Thanks for the post. Have passed your question on to one of our engineers. In the meantime i have uploaded the EM20 Generic Manual to the downloads section. The RoverK is basically a mod of the EM20 so should give you some ideas.
Rico
Thanks for the post. Have passed your question on to one of our engineers. In the meantime i have uploaded the EM20 Generic Manual to the downloads section. The RoverK is basically a mod of the EM20 so should give you some ideas.
Rico
- Thu May 10, 2007 2:33 pm
- Forum: Technical Information
- Topic: Read this before posting
- Replies: 0
- Views: 10956
Read this before posting
Hi and welcome to the GEMS forum. Before you post: - Please read the rules of the forum by clicking here: http://gems.co.uk/gemsforum/viewtopic.php?t=3 and obey these rules at all times, you will be banned otherwise. - Remember to check through current threads before posting as the topic you wanted ...
- Thu May 10, 2007 2:32 pm
- Forum: Technical Support
- Topic: Read this before posting
- Replies: 0
- Views: 11651
Read this before posting
Hi and welcome to the GEMS forum. Before you post: - Please read the rules of the forum by clicking here: http://gems.co.uk/gemsforum/viewtopic.php?t=3 and obey these rules at all times, you will be banned otherwise. - Remeber to check through current threads before posting as the topic you wanted t...
- Thu May 10, 2007 2:27 pm
- Forum: General Chat
- Topic: Read this before posting
- Replies: 0
- Views: 14252
Read this before posting
Hi and welcome to the GEMS forum. Before you post: - Please read the rules of the forum by clicking here: http://gems.co.uk/gemsforum/viewtopic.php?t=3 and obey these rules at all times, you will be banned otherwise. - Remeber to check through current threads before posting as the topic you wanted t...