Search found 537 matches
- Thu Dec 06, 2007 3:14 pm
- Forum: Technical Information
- Topic: Lotus Elise 160 Sport ECU
- Replies: 4
- Views: 17141
Re: Lotus Elise 160 Sport ECU
The Cost of a service would be around £80, the calibration can be saved and reloaded and won't be lost. If you check out the resellers on our website you will see a number of places you could take your car to get it mapped. The 3 pin plug is used to connect to the ECU in order to connect you would h...
- Fri Sep 28, 2007 1:52 pm
- Forum: Technical Support
- Topic: help
- Replies: 5
- Views: 12937
- Thu Sep 27, 2007 2:04 pm
- Forum: Technical Support
- Topic: Idle Valve for Mitsubshi
- Replies: 2
- Views: 9130
- Thu Sep 27, 2007 11:21 am
- Forum: Technical Support
- Topic: help
- Replies: 5
- Views: 12937
- Fri Aug 24, 2007 12:02 pm
- Forum: Technical Support
- Topic: PC - ECU comms problem
- Replies: 11
- Views: 22386
- Thu Aug 16, 2007 9:56 am
- Forum: Technical Information
- Topic: Boost Control
- Replies: 4
- Views: 13184
There may be little boost avaliable but you may as well use it, If you close the wastegate perhaps 70% then the boost will help the car maintain the speed, you have to take account of greater rolling resistances and drag at higher speeds. This will also keep the tubo spinning and therefore enable bo...
- Wed Aug 15, 2007 3:26 pm
- Forum: Technical Information
- Topic: Boost Control
- Replies: 4
- Views: 13184
Hi For low engine speeds and loads i would suggest you don't close the wastegate it makes the driveability of the car a lot easier at low speeds as you don't keep getting big chunks of boost, i wouldn't start closing the wastegate until you hit 1600 - 1800 rpm. I hope this helps, it is probably some...
- Fri Aug 03, 2007 3:55 pm
- Forum: Technical Support
- Topic: Boost Target Map
- Replies: 8
- Views: 18038
- Fri Aug 03, 2007 10:22 am
- Forum: Technical Support
- Topic: Boost Target Map
- Replies: 8
- Views: 18038
- Wed Aug 01, 2007 9:59 am
- Forum: Technical Support
- Topic: Boost Target Map
- Replies: 8
- Views: 18038
- Fri Jun 01, 2007 9:34 am
- Forum: Technical Information
- Topic: K Implant DFCO parameters
- Replies: 5
- Views: 16899
- Fri May 25, 2007 1:45 pm
- Forum: Technical Information
- Topic: K Implant DFCO parameters
- Replies: 5
- Views: 16899