Search found 3 matches
- Wed Sep 05, 2018 3:47 pm
- Forum: Technical Support
- Topic: Calibration Conversion
- Replies: 7
- Views: 15815
Re: Calibration Conversion
I'm pretty much almost there however whilst cranking the ECU isn't registering an engine speed.. despite the crank sensor working fine... I've already had to enable the TPS source option as it wasn't reading anything for the throttle. Is there an option related to the engine speed signal ?
- Mon Sep 03, 2018 3:00 pm
- Forum: Technical Support
- Topic: Calibration Conversion
- Replies: 7
- Views: 15815
Re: Calibration Conversion
No need to say sorry... Through trial and error as such i've managed to extract the OMEX .GIN files from MAP4000 and have them installed in GWv4 which is allowing me to carry out a conversion however there are numerous differences/parameter as youve previously mentioned so it may be easier to start ...
- Tue Aug 28, 2018 8:14 pm
- Forum: Technical Support
- Topic: Calibration Conversion
- Replies: 7
- Views: 15815
Calibration Conversion
I have a calibration file from an OMEX 710 v0.70 and would like to use an EM36 I have sitting on the shelf. Can you advise on how to convert easily to EM36 v0.89 rather than start from scratch with a new calibration. Is a conversion tamplate available for GWv4 ?