Search found 6 matches
- Fri Jun 14, 2013 9:46 am
- Forum: Technical Support
- Topic: MiniDLS ecu connection problem
- Replies: 10
- Views: 20010
Re: MiniDLS ecu connection problem
Hello all, problem turns out to be an issue with running Gemscom under windows XP. As a test I made a DOS bootable floppy and ran Gemscom from the floppy. Now no issue with ECU going offline. Also downloads etc seem to be much faster? A couple of 'out of memory' warnings when comparing files but I g...
- Wed Jun 12, 2013 9:40 am
- Forum: Technical Support
- Topic: MiniDLS ecu connection problem
- Replies: 10
- Views: 20010
Re: MiniDLS ecu connection problem
Cheers for the manual. I'm wondering if this is a grounding problem as it's so intermittant and does not seem to follow any pattern. Will take a multimeter home at the weekend and try to make some checks on the cable and pinouts. If I can stop the ECU going off line then I'll try updating the map. T...
- Tue Jun 11, 2013 5:06 pm
- Forum: Technical Support
- Topic: MiniDLS ecu connection problem
- Replies: 10
- Views: 20010
Re: MiniDLS ecu connection problem
Hello thankyou for the Gemscom manual. A little reading for tonight? If you could send me the mindls manual to go with this that would be great. Rick I replied to your message and sent the downloaded .do file along with a comparison map I was hoping to get closer to. I could grab a multimeter and tr...
- Tue Jun 11, 2013 9:34 am
- Forum: Technical Support
- Topic: MiniDLS ecu connection problem
- Replies: 10
- Views: 20010
Re: MiniDLS ecu connection problem
Thanks again for the quick reply. Well it almost works. Gemscom does connect to the EMS but keeps going offline. Sometimes it’s only online for a few seconds; sometimes it seems to stay connected for a minute or two. When it is connected I can see the battery voltage, TPS values etc so it seems to b...
- Mon Jun 10, 2013 7:10 pm
- Forum: Technical Support
- Topic: MiniDLS ecu connection problem
- Replies: 10
- Views: 20010
Re: MiniDLS ecu connection problem
Many thanks for the quick help. I have the PM and will try the exe tonight.
- Mon Jun 10, 2013 2:45 pm
- Forum: Technical Support
- Topic: MiniDLS ecu connection problem
- Replies: 10
- Views: 20010
MiniDLS ecu connection problem
Hello, I hope you might be able to help and this is my first Gems post. I have a Zetec 2l on carbs running an old Minidls Gems ECU. ECU has always run well and I’ve had no reason in the past to make any changes. After having the carbs rebuilt I’ve now decided to take a look at the ignition map to im...