Search found 6 matches
- Mon Mar 19, 2012 5:07 pm
- Forum: Technical Support
- Topic: G2.41 - flatshifting
- Replies: 5
- Views: 12053
Re: G2.41 - flatshifting
I would presume it is the front/back side/side pressure within the stick - previous ones I've had (all be it on a sequential) were simply a strain gauge that would trigger the switch when pulled for the next gear. This one will be the same but working in both directions...
- Mon Mar 19, 2012 4:11 pm
- Forum: Technical Support
- Topic: G2.41 - flatshifting
- Replies: 5
- Views: 12053
Re: G2.41 - flatshifting
Hi Rick, Many thanks, the switch being used is pressure dependent, however, I am presuming that on an h-pattern box it can activate in both directions (unlike a sequential) and so could theoretically activate on a downshift too, hence the desire for a rev activated variable that would only kick in t...
- Sun Mar 18, 2012 11:53 pm
- Forum: Technical Support
- Topic: G2.41 - flatshifting
- Replies: 5
- Views: 12053
G2.41 - flatshifting
Hi Guys, Another question for you... what flatshift capability does the G2.41 board have? I'm looking at using http://www.holinger.com.au/pdfs/hgk-h.pdf in conjunction with a dogbox, however, as it's h-pattern the flat-shift/ignition cut would need to be able to activated only over a certain rpm (to...
- Thu Mar 15, 2012 5:49 pm
- Forum: Technical Support
- Topic: G2.41 - datalogging
- Replies: 5
- Views: 11853
Re: G2.41 - datalogging
Many thanks for the info. I think it may be some work but I'm interested to try. The added complication is I will need to transfer the data wirelessly or by Bluetooth!
- Thu Mar 15, 2012 2:26 pm
- Forum: Technical Support
- Topic: G2.41 - datalogging
- Replies: 5
- Views: 11853
Re: G2.41 - datalogging
Hi Rick,
Hugely appreciated, one more quick one, is the Air Temp outside air temp or intake temp? I was hoping to grab an intake temp for the logging as well, just wondering if I have to grab another sensor or if there is something I can extract from the GEMs.
Cheers!
Graeme.
Hugely appreciated, one more quick one, is the Air Temp outside air temp or intake temp? I was hoping to grab an intake temp for the logging as well, just wondering if I have to grab another sensor or if there is something I can extract from the GEMs.
Cheers!
Graeme.
- Thu Mar 15, 2012 4:55 am
- Forum: Technical Support
- Topic: G2.41 - datalogging
- Replies: 5
- Views: 11853
G2.41 - datalogging
Hi, I'm hoping someone can help. I have a Group A Evo 3 with the G2.41 board. I am wondering what outputs it can send to a logger? I have a piece of datalogging software I'm trialing which can currently take a number of inputs (OBD, CAN). What form does (or can?) the ECU send out data in? I have see...