Search found 3 matches
- Tue Jun 08, 2010 11:48 am
- Forum: Technical Information
- Topic: Subaru
- Replies: 5
- Views: 17499
Re: Subaru
Thanks for the picture Ed, my problem is that the connector was directly soldered to the board, I don't have any lead wires so I can't tell which way the round connector goes back on the board.
Greg
Greg
- Mon Jun 07, 2010 1:30 am
- Forum: Technical Information
- Topic: Subaru
- Replies: 5
- Views: 17499
Re: Subaru
Hi Ed,
Thanks for the reply. It has the following on the yellow connectors:
SUBARU 97 01X173
and the eprom says subaru 97 2.17
Thanks, Greg
Thanks for the reply. It has the following on the yellow connectors:
SUBARU 97 01X173
and the eprom says subaru 97 2.17
Thanks, Greg
- Fri May 28, 2010 3:50 pm
- Forum: Technical Information
- Topic: Subaru
- Replies: 5
- Views: 17499
Subaru
Hi, I am the owner of a Gems Impreza PnP ECU STI v3/4 and an attached CDC PWM diff controller. The ecu is currently tuned to 99 octane for a rally application. I had a look at the board the other day and the 3 pin plug broke off. The circuit board is ok, but for the future I want to solder 3 wires t...