Search found 537 matches
- Wed Jun 29, 2022 9:35 am
- Forum: Technical Information
- Topic: Fiesta st180 ecu
- Replies: 12
- Views: 91744
Re: Fiesta st180 ecu
During the pandemic, most of our hardware development work was reduced to tick-over and now, as we are all suffering from world-wide component shortages as suppliers start finding their feet again, development is still on the back foot. Will leave this thread open and will update when things take an...
- Wed Jun 29, 2022 9:20 am
- Forum: General Chat
- Topic: Returning items for testing/repair
- Replies: 0
- Views: 75421
Returning items for testing/repair
As you are probably aware, the turnaround time for units to be sent for repair/service is extending, due to the global tardiness in obtaining replacement components. GEMS will endeavour to provide the promptest (and safest) solution to this current issue and will continue to provide the best service...
- Wed Jun 29, 2022 8:33 am
- Forum: Displays
- Topic: LDS3R Quick Start Guide
- Replies: 0
- Views: 75188
LDS3R Quick Start Guide
For those interested an getting to grips with our small format, steering wheel mountable LDS3R display, here is a downloadable Quick-Start guide for the editor, to give you a feel as to it's purpose and functionality. LDS3R Quick Start Guide.docx As firmware versions are rolled out, the layout of so...
- Thu Nov 05, 2020 5:15 pm
- Forum: Engine ECU's
- Topic: Setting up CAN bus for GEMS ECUs
- Replies: 0
- Views: 14352
Setting up CAN bus for GEMS ECUs
Just a quick downloadable note on how to set up the CAN bus (or busses) in GEMS ECUs for use with CAN fed loggers and displays. Primarily meant for GEMS displays but might prove useful for others....
- Tue Aug 18, 2020 2:20 pm
- Forum: Engine ECU's
- Topic: Lambda CJ125 options
- Replies: 0
- Views: 12460
Lambda CJ125 options
We have found that, significant amounts of noise generated by 'GDI injectors', can disturb the on-board CJ125 wideband lambda amplifier, especially if neither wire bundles are screened or shielded. So if you want to take additional precautions, an impulse filter is now included, the Lambda Temp Filt...
- Tue May 05, 2020 10:39 am
- Forum: Technical Support
- Topic: G.E.M.S. TATRA BOARD ISSUE.B
- Replies: 13
- Views: 103364
Re: G.E.M.S. TATRA BOARD ISSUE.B
You stay safe too Havrla..!
- Tue Apr 14, 2020 1:48 pm
- Forum: Engine ECU's
- Topic: CAN Telemetry and Bus creation
- Replies: 0
- Views: 12552
CAN Telemetry and Bus creation
Setting up CAN Telemetry in '80' series GEMS ECUs The '80' series GEMS ECUs, can have their CAN bus transmissions setup via the GWv4 calibration software. This can be actioned by selecting the 'Telemetry' tab at the top of the GWv4 workspace, once you have opened your calibration and then selecting ...
- Tue Mar 24, 2020 6:24 pm
- Forum: Engine ECU's
- Topic: Connecting to a GEMS Ethernet based ECU
- Replies: 0
- Views: 12601
Connecting to a GEMS Ethernet based ECU
When connecting to an EM80, GDi80 or RX80 ECU, using an Ethernet interface with calibration software GWv4, make sure that the calibration software is set for 'Ethernet' in the Connection Setup feature. The following document will show you the two simple steps that you need to follow.... Connecting t...
- Mon Mar 02, 2020 10:53 am
- Forum: Technical Support
- Topic: G.E.M.S. TATRA BOARD ISSUE.B
- Replies: 13
- Views: 103364
Re: G.E.M.S. TATRA BOARD ISSUE.B
Excellent news...! Well done...
It we get any more Tatra ECU queries, I now know who I can send them to..!!
Best regards, RickS
It we get any more Tatra ECU queries, I now know who I can send them to..!!
Best regards, RickS
- Mon Mar 02, 2020 8:39 am
- Forum: Technical Support
- Topic: ShiftTec - TC83
- Replies: 1
- Views: 7841
Re: ShiftTec - TC83
GIN file attached...
- Mon Feb 17, 2020 12:14 pm
- Forum: Engine ECU's
- Topic: Resizing Petrol Injectors
- Replies: 0
- Views: 13215
Resizing Petrol Injectors
You can change the size of your injectors by using GWv4... If you open the [Fuel] grid or graph and "right click" on it, you will see the following panel. Now "left click" on the "Fuel Map Functions" option and select "Change Injectors/Pressure" Resize injectors#1.png Next, you will now see a panel...
- Wed Dec 18, 2019 9:23 am
- Forum: Technical Information
- Topic: GEMS ad4 ?
- Replies: 1
- Views: 10511
Re: GEMS ad4 ?
The DA1 unit is an older style data logging unit, a manual for which is available from our website at :- https://www.gems.co.uk/downloads/manuals/ There is a special cable for programming and downloading data from the logger and hopefully this was in the usual 'box of bits' that you received when yo...
- Thu Dec 12, 2019 2:41 pm
- Forum: Engine ECU's
- Topic: Setting the Ignition Synchronisation strategy.
- Replies: 0
- Views: 12948
Setting the Ignition Synchronisation strategy.
Ignition timing The ECU recognises the engine position by a missing / extra tooth on a pattern of evenly spaced teeth or by a pattern of cam teeth. Different manufacturers have this reference in a different place on the trigger wheel so the ECU needs to have adjustment for this. The numbers are know...
- Fri Nov 15, 2019 3:36 pm
- Forum: Technical Support
- Topic: Code 193 ems pipe
- Replies: 3
- Views: 10799
Re: Code 193 ems pipe
EMS - probably Engine Management System.
Pipe - probably a 'Google Translate' typo
CODE 193 - no idea. This code not generated by GEMS hardware, as far as I know.
Pipe - probably a 'Google Translate' typo
CODE 193 - no idea. This code not generated by GEMS hardware, as far as I know.
- Tue Nov 12, 2019 8:30 am
- Forum: Technical Support
- Topic: dlog97 for dlog94 error in VMMAPPER
- Replies: 20
- Views: 39235
Re: dlog97 for dlog94 error in VMMAPPER
Attached is all that I can find - initially (will have a deeper recce when I get a moment or two)...
It covers the associated software and the DA97 pinout.
Let me know if this covers what you need. Regards, Rick
It covers the associated software and the DA97 pinout.
Let me know if this covers what you need. Regards, Rick