Search found 534 matches

by RickS
Thu Nov 05, 2020 5:15 pm
Forum: Engine ECU's
Topic: Setting up CAN bus for GEMS ECUs
Replies: 0
Views: 614

Setting up CAN bus for GEMS ECUs

Just a quick downloadable note on how to set up the CAN bus (or busses) in GEMS ECUs for use with CAN fed loggers and displays. Primarily meant for GEMS displays but might prove useful for others....
Setting up a CAN bus.docx
Telemetry setup
(105.76 KiB) Downloaded 63 times
by RickS
Tue Aug 18, 2020 2:20 pm
Forum: Engine ECU's
Topic: Lambda CJ125 options
Replies: 0
Views: 876

Lambda CJ125 options

We have found that, significant amounts of noise generated by 'GDI injectors', can disturb the on-board CJ125 wideband lambda amplifier, especially if neither wire bundles are screened or shielded. So if you want to take additional precautions, an impulse filter is now included, the Lambda Temp Filt...
by RickS
Tue May 05, 2020 10:39 am
Forum: Technical Support
Topic: G.E.M.S. TATRA BOARD ISSUE.B
Replies: 13
Views: 13312

Re: G.E.M.S. TATRA BOARD ISSUE.B

You stay safe too Havrla..!
by RickS
Tue Apr 14, 2020 1:48 pm
Forum: Engine ECU's
Topic: CAN Telemetry and Bus creation
Replies: 0
Views: 1065

CAN Telemetry and Bus creation

Setting up CAN Telemetry in '80' series GEMS ECUs The '80' series GEMS ECUs, can have their CAN bus transmissions setup via the GWv4 calibration software. This can be actioned by selecting the 'Telemetry' tab at the top of the GWv4 workspace, once you have opened your calibration and then selecting ...
by RickS
Tue Mar 24, 2020 6:24 pm
Forum: Engine ECU's
Topic: Connecting to a GEMS Ethernet based ECU
Replies: 0
Views: 1054

Connecting to a GEMS Ethernet based ECU

When connecting to an EM80, GDi80 or RX80 ECU, using an Ethernet interface with calibration software GWv4, make sure that the calibration software is set for 'Ethernet' in the Connection Setup feature. The following document will show you the two simple steps that you need to follow.... Connecting t...
by RickS
Mon Mar 02, 2020 10:53 am
Forum: Technical Support
Topic: G.E.M.S. TATRA BOARD ISSUE.B
Replies: 13
Views: 13312

Re: G.E.M.S. TATRA BOARD ISSUE.B

Excellent news...! Well done...
It we get any more Tatra ECU queries, I now know who I can send them to..!!

Best regards, RickS
by RickS
Mon Mar 02, 2020 8:39 am
Forum: Technical Support
Topic: ShiftTec - TC83
Replies: 1
Views: 1217

Re: ShiftTec - TC83

GIN file attached...
TC8300x55.gin
00x55 (TC83) .GIN file
(129.96 KiB) Downloaded 162 times
by RickS
Mon Feb 17, 2020 12:14 pm
Forum: Engine ECU's
Topic: Resizing Petrol Injectors
Replies: 0
Views: 1293

Resizing Petrol Injectors

You can change the size of your injectors by using GWv4... If you open the [Fuel] grid or graph and "right click" on it, you will see the following panel. Now "left click" on the "Fuel Map Functions" option and select "Change Injectors/Pressure"  Resize injectors#1.png Next, you will now see a panel...
by RickS
Wed Dec 18, 2019 9:23 am
Forum: Technical Information
Topic: GEMS ad4 ?
Replies: 1
Views: 2063

Re: GEMS ad4 ?

The DA1 unit is an older style data logging unit, a manual for which is available from our website at :- https://www.gems.co.uk/downloads/manuals/ There is a special cable for programming and downloading data from the logger and hopefully this was in the usual 'box of bits' that you received when yo...
by RickS
Thu Dec 12, 2019 2:41 pm
Forum: Engine ECU's
Topic: Setting the Ignition Synchronisation strategy.
Replies: 0
Views: 1314

Setting the Ignition Synchronisation strategy.

Ignition timing The ECU recognises the engine position by a missing / extra tooth on a pattern of evenly spaced teeth or by a pattern of cam teeth. Different manufacturers have this reference in a different place on the trigger wheel so the ECU needs to have adjustment for this. The numbers are know...
by RickS
Fri Nov 15, 2019 3:36 pm
Forum: Technical Support
Topic: Code 193 ems pipe
Replies: 3
Views: 2551

Re: Code 193 ems pipe

EMS - probably Engine Management System.
Pipe - probably a 'Google Translate' typo
CODE 193 - no idea. This code not generated by GEMS hardware, as far as I know.
by RickS
Tue Nov 12, 2019 8:30 am
Forum: Technical Support
Topic: dlog97 for dlog94 error in VMMAPPER
Replies: 20
Views: 15028

Re: dlog97 for dlog94 error in VMMAPPER

Attached is all that I can find - initially (will have a deeper recce when I get a moment or two)...
It covers the associated software and the DA97 pinout.
Let me know if this covers what you need.
DA97 User Manual.pdf
DLOG97/DA97 user namual
(396.01 KiB) Downloaded 193 times
Regards, Rick
by RickS
Mon Nov 11, 2019 2:30 pm
Forum: Technical Support
Topic: dlog97 for dlog94 error in VMMAPPER
Replies: 20
Views: 15028

Re: dlog97 for dlog94 error in VMMAPPER

Well, that serial number IS old..!
Before we became fully computerised.... Good luck with finding suitable cards and a reader.
by RickS
Wed Nov 06, 2019 12:04 pm
Forum: Technical Support
Topic: dlog97 for dlog94 error in VMMAPPER
Replies: 20
Views: 15028

Re: dlog97 for dlog94 error in VMMAPPER

PM (and file) sent.....
.... note:- rename the file extension to .VXD when you receive it
by RickS
Mon Nov 04, 2019 8:45 am
Forum: Technical Support
Topic: dlog97 for dlog94 error in VMMAPPER
Replies: 20
Views: 15028

Re: dlog97 for dlog94 error in VMMAPPER

Apologies -Has now been resent....
Rick