================================================================================ GDA: GEMS Data Analysis (+ GDA Pro + TK10) Revision History ================================================================================ All modifications to the software are recorded by the developer in this file. Modification labels in this file correspond to tickets in the issue tracker. ================================================================================ ================================================================================ Version 4.0.12 - Built on 18 March 2011 ================================================================================ Updated gcmapi to version 1.5 (ecu comms lib). #582: TK10: Gear position should support decreasing values. Handle wrapped gear sensor. #583: TK10: Internal Temp (TK10) is shown in the logging list but not logged. Use default of 20Hz for channels setup for logging that do not have a default rate. #584: TK10 Setup: "stop log when not zero" => "stop log when zero". Implemented using an alarm. #586: [Fixed snap to fastest channel when maths channels are used]. #574: 'Run Time' should show decimal places when in auto decimal places mode. #585: TK10: Upload firmware. #565: Live update when editing channel properties. ================================================================================ Version 4.0.11 - Built on 04 March 2011 ================================================================================ Fixed error in steering scalar. Fixed screen selection. ================================================================================ Version 4.0.10 - Built on 04 March 2011 ================================================================================ TK10 setup: Don't update filename in setup editor caption to temporary name when uploading. TK10 setup: Fixed crash uploading setup with no gear setup. TK10 setup: Alpha-sort screen selector combo boxes. ================================================================================ Version 4.0.9 - Built on 04 March 2011 ================================================================================ #576 - Hide Test button in TK10 Setup editor. #579 - TK10: Invisible output mode not working correctly. #577 - TK10 setup editor does not prompt for save on program close. Programming logger would set the setup to the non-modified state. #578 - Tentative fix for showing select logger dialog when tk10 already enumerated. #580 - Move some setup editor button features to top-level menu items. Reorganised setup editor dialog. Added recent files to setup editor. Fixed refactoring of imported dlog maths. Fixed steer angle scalar setup. Added name sort combobox to channels list config dialog. ================================================================================ Version 4.0.8 - Built on 01 March 2011 ================================================================================ Fixed a few TK10 teething issues (not logging, setup menu hidden). ================================================================================ Version 4.0.7 - Built on 01 March 2011 ================================================================================ #566 - Implement TK10 setup. Add TK10 driver to installer. Fixed a few issues with keyboard shortcuts dialog. ================================================================================ Version 4.0.6 - Built on 10 February 2011 ================================================================================ #548 - Trim log data - excessive number of decimal places shown. #549 - Fixed range, entering a time with decimals works fine but entering a time in integer (eg 10) always returns zero. #550 - Cannot select internal/analogue/speed channels etc as sources in da99 setup. Loading keyboard short-cuts does not clear items that need to be cleared. Added combine16_float32 maths function (combine 2 16bit integers and interpret as a 32bit IEEE float). Added reinterpret_float32 maths function (interprets integer value as a 32bit IEEE float). Added option to view values in hex when displaying raw values in the channels list. ================================================================================ Release Candidate Version 4.0.5 - Built on 13 December 2010. ================================================================================ #547 - Data Analysis Standard - Dongle Update always crashes GDA. ================================================================================ Release Candidate Version 4.0.4 - Built on 09 December 2010. ================================================================================ Fix slight issue with quick start from quick mode. ================================================================================ Release Candidate Version 4.0.3 - Built on 09 December 2010. ================================================================================ #543 - Quick start page: Don't show if in quick mode. #544 - Fixed snap to fastest rate when there are invalid channels. Honour decimal places on 'Time' row of channels list. Prevent error message at shutdown if tried to open invalid file in bitmap view. ================================================================================ Release Candidate Version 4.0.2 - Built on 09 December 2010. ================================================================================ Fixed installation of demo files for GDA pro. #541 - Fixed possible crash when entering quick mode with non-existent demo file. ================================================================================ Release Candidate Version 4.0.1 - Built on 09 December 2010. ================================================================================ Fix possible lock-up with log file that has several maths channels that do not compile. #523 - Download log: If logger not detected, show select logger list. If list is empty, say no loggers detected in logger list. #524 - Quick Mode: on first time use, use last opened project or demo file. #525 - Demo project for first time load. #526 - Fixed crash when log playback completes and no views are displayed. #527 - Project explorer - if the project explorer is not the active window, clicking the notes button does nothing. #529 - Setup editor should have a windows close button. #530 - Keyboard Shortcuts: Shortcut text-box should be a label. #532 - Dblclick in script column on maths manager opens script dialog behind it. #533 - Rearrange tab should be removed from context menus. #534 - Workspace: Ability to hold down alt to disable snap of views. #535 - crash with cut/paste. #536 - Phantom autohide button on work-page windows. #537 - Project explorer: Can not enter usable area using keys i.e. ctrl+tab. #538 - Key for moving select to value on channel and time reports. #539 - cut/copy/paste in the main menu can be removed. Rearranged log view menu slightly. Renamed 'Paste' in layout menu to 'Paste Views' and disable if there is no layout data on the clipboard. Added centre cursor mode to time report. Changed defaults for zoom and select dblclick action for time + channel reports. Auto fix-up of log file name in obvious paths. ================================================================================ Release Candidate Version 4.0.0 - Built on 07 December 2010 ================================================================================ Refinements to DA99 connection (only read visible values from the logger). Added DA99 live values information to the manual. ================================================================================ Version 0.0.48 - 06 December 2010 ================================================================================ #476 - Display live DA99 values from Setup Test dialog. #495 - Track View: Not drawing on reload of project. #496 - Traces not shown on the first tab displayed are zoomed incorrectly. #497 - After first load of project, moving to a different tab sets the project to modified. #498 - Mis-spelled menu item: Centrr to Global Cursor. #500 - Manual: Missing variable CDROM_NAME in the installation section. #501 - Manual: Layout menu page references GWv4. #502 - Reset workspace layout: breaks with minimised side windows. #503 - Import CSV is greyed out if a log file has not yet been added to the project. #504 - Import CSV: Crashes when saving as new log file. #505 - Channel list menu: edit maths for calculated distance channel -> distance channel config. #506 - Improve handling of deletion of all lanes in a log trace view via menu. #507 - Trace is not redrawn if the channel is changed in the config dialog. #508 - Quick Mode. #510 - Load Template. #511 - Add Quick Mode section to manual. #512 - Dialog at start up to select quick mode/project mode. #514 - Export dialog should select main layer log file by default. #516 - Trim dialog should select main layer log file by default. #517 - Layout | Close all tabs broken. #518 - Quick Mode indicator in status bar. #519 - Consolidate save options when project is closed. #520 - Store expand state of project explorer nodes in the model. #521 - Setup Editor: Add incremental search to Output Rate and Sensor Gain. #522 - Setup Editor: DA99-L2: Remove com codes from inputs - not relevant. Fixed error in time handling of CSV import resulting in huge files. Fixed scaling in CSV import. Improved progress metering of CSV import. Load imported CSV after import. When selecing a replacement log file for one that does not exist, the track and layer assignments are not fixed-up. Force project to modified state if log files are fixed up during project load. Adjusted names of Open Log file menu items (add/replace), and change 'project' to 'session' when in Quick Mode. ================================================================================ Version 0.0.47 - Built on 30 November 2010 ================================================================================ #21 - Help File. #449 - Maths Editor: Function tip can obscure cursor location. #463 - On multi axis offset should be able to go negative. #469 - On pc with low privileges, fails to write common_settings.xml at exit. #470 - && not parsing correctly in maths. #471 - Unary ! maths operator. #466 - Add Not to the histogram and/or conditions. #474 - Stretchable/resizeable layout. #477 - Fixed issue with side-docked windows and unusual sizes. #472 - Load/Save track map. #473 - Option to store generated track map in project rather than recalculating every time. #480 - Add way of scrolling one sample at a time (ctrl and arrow keys). #481 - Centre to global cursor command. #484 - Notes window should not have 'Rename Window' in its context menu. #483 - Reset workspace layout is broken. #487 - Warn if auto file name cannot be generated because information is missing from the notes. #457 - Add DA1 drivers to installer and put in application folder. #478 - Read log failure button icon. #479 - Optional time column in csv export. #464 - Centre cursor option on channel report. #491 - Edit log file setup. #489 - Data analysis pro does not remember location for storing downloaded data. #486 - Add recent log files list to file menu. #490 - Display DA99 checksum when setup is programmed in the logger output info. #433 - Print out of track map and sections grid. Changed selection statistics defaults. Selection statistics now display for all data when there is no selection. Avoid potentially long hang when closing a project or the application if still generating maths in the background. Internal adjustments to the way time/distance is handled by log views. Change channel list configuration dialog title. Ellipsis text in maths manager dialog. Checkbox in bar view configuration dialog for vertical/horizontal orientation. Channels can now be dropped onto gauge views. Channels can now be dropped onto histogram views. Channels can now be dropped onto fft views. Histograms and FFT views can now be added from the right-click menu on the channels list. Added tooltips to channel list column header. Disable 'edit maths' button in channel properties window in non-pro versions, which would crash the application if clicked. Fix ok/cancel buttons on generate histogram bins dialog. Snap to tab client area bounds when moving windows. Loading the last project at startup could make it appear to be modified. Fixed program setup menu command when using DA99. ================================================================================ Version 0.0.46 - Built on 10 November 2010 ================================================================================ Disabled GLO support for the time being. Changed user interface for setting up channel report axes and made it more flexible. Min/Max mode is now configurable on channel report. Dropping a channel into a channel report now updates the config dialog. Added variadic function handling to maths. Added avg and avg_nonzero functions to maths. Show maths script as tool tip in channel properties. Improved log trace configuration dialog. Added GPS valid/fix channel option to GPS track mapping. Handle relative paths for log files if a project logs folder has been set up. Added maths functions that enable distance channel calculation from GPS data. Added declick_if maths function. #445 - Bitmap Gauge. #440 - Colour Preferences: Using the Enter key does not work correctly. #46 - Bar Gauge. #441 - Status Light: Inherit start/default colours from gauge colour settings. #439 - Setup Editor: CAN channels not displayed for new DA99-L2 setup. #448 - TK10: maths is not correct if source rates are different to output rate. #447 - TK10: Use VID_MIN and VID_MAX from maths outputs for channel range. #438 - Notes dialog may be required before saving log if using auto file-naming. #458 - Close config dialog for log trace when changing tab. #460 - With a new blank workspace, don't add channels to the trace automatically. ================================================================================ Version 0.0.45 - Built on 11 October 2010 ================================================================================ #427 - Fixed handling of signed data (and scaling in general) in some cases. #429 - TK10 - log notes - the logger type should be shown as TK10 not CD24. Double clicking a marker in the marker list now sets the global cursor rather than displaying the marker edit dialog. #431 - Overrun markers erroneously treated as lap markers. Markers are only stored in the project if non default. This will break loading of markers from existing projects. #432 - Preference to turn off primary layer zooming. Fixed min/max editors in log trace config dialog. Prevent scrolling view in log trace config dialog when an editor is clicked. Changed distance channel dialog name to match menu item name. Fixed name of time report dialog. Added line width option to track map. ================================================================================ Version 0.0.44 - Built on 06 October 2010 ================================================================================ #406 - De-click maths function. #415 - Log notes - the created and modified times should be local time, not UTC. Display "Created" as "Downloaded" in the log notes. Added Logged date to TK10 log notes. #413 - Log Notes dialog should show file name of log to which the notes pertain. #414 - Right click on a log file in Project Explorer and select log markers - log markers dialog is not updated for the specific file selected. Remove local maths item from maths manager if a log file is closed. Improved log run list dialog (TK10). #411 - Implement sorting in log run list dialog. #412 - (tentative fix) If there is a corrupt log run definition, the analysis software fails to download the log run list. Added hyperlink to website on toolbar. #409 - TK10: Fixed handling of partial frames at the end of log runs. Fixed marker handling for TK10. #416 - TK10: Add support for overrun and overrun reset markers. #421 - TK10: Add support for maths sensors/ maths outputs. #418 - TK10 - If you cancel log run list, download menu item always fails with "An operation is already in progress". Fixed creation of default layout when opening a log into a completely blank project. #388 - Tentative Fix: When downloading and opening a TK10 data file in a new project, the log starts zoomed in. Note that it is intentional that the primary layer is zoomed in. #410 - Cleanup temporary files. Treat maths channels that return a single value as constants as an initial workaround until true constants are available. #422 - Open multiple log files from log file dialog. #423 - TK10: put logger info (serial number, version etc) in the log notes. #420 - TK10: Add original setup file name into the notes. Update sample count/runtime before displaying log dialog for TK10. Removed 'use template' check box from new project dialog. #417 - DA1: add 250KHz bus speed + manual bus timing edits for raw CAN timings. #402 - Adjusted time/distance precision in channels view. #58 - Export CSV [Pro]. ================================================================================ Version 0.0.43 - Built on 22 September 2010 ================================================================================ Crash fix. ================================================================================ Version 0.0.42 - Built on 22 September 2010 ================================================================================ #369 - Trim log file. #407 - Laps bar does not display when in distance mode. Implement ECC in tk10 download. Reduced memory overhead for stf log files. Updated to latest emerald4 version. ================================================================================ Version 0.0.41 - Built on 17 September 2010 ================================================================================ Handle open log file messages from GWv4. Disabled develompental export log dialog for public beta. ================================================================================ Version 0.0.40 - Built on 15 September 2010 ================================================================================ #401 - Setup Editor - Record rate can only be set to 1kHz. #404 - Changing CAN values in setup editor updates all channels with same ID. #405 - Separate "Add log file" and "Open log file". Snap log playback timer to fastest channel rate. Fixed possible scaling bug when double clicking vertical zoom bar on log lanes. Double click horizontal slider to switch zoom between 'all' and 'main layer'. Added display of source gain to channel properties. Fixed sample count string in channel properties (omit "Samples: "). Applied workaround for strange tooltip wrapping problem. Added dropdown action selector for opening log files (remembers preference). ================================================================================ Version 0.0.39 - Built on 07 September 2010 ================================================================================ #298 - Maths Editor: Show undefined channel error in compile error window. #299 - Maths Editor: Confirm exit when clicking ok and maths will not compile. #385 - Auto-complete in channel picker. #386 - Show channel colour in channel picker control. #383 - Get unhandled exception when selecting logger. #382 - Log playback does not work when viewing by distance. #381 - Warning triangle on bad maths channels. Added maths error information to channel properties window. Layout of channel properties box condensed slightly. #387 - Show time/distance in channel list. #384 - Channel deltas in channels list view. #390 - Add ability to show raw (A/D) channel data in the channel list. Right align numbers in channels list. Fixed situation where track that uses maths channels would sometimes not be created correctly after loading a project. Added low priority load on log files that are not the primary layer when loading projects. #357 - Trace graph view: Auto axis column option in multi-axis lane mode. #391 - In logger setup editor, get rid of space to put cell in edit mode and replace with F2. #392 - Setup editor - pgup and pgdown should scroll. #393 - Setup editor - redraw issue in top left hand corner of right hand pane. #394 - Setup editor - Object selector dialog, alpha sort does not work. #395 - Setup editor - clicking on column headers to sort does not update the currently active edit control. #396 - Setup editor - sensor gain only goes to 8x128. It should go to 8x256 to enable selecting of upper byte. #397 - Setup editor - for sensor gain, it would be nice to add two aliases - 8 bit Lower Byte for 8x1 and 8 bit Upper Byte for 8x256. #400 - DA1 logger setup - when creating a new setup, the CAN in the logger does not work (flashing light) until the logger comms page is modified. ================================================================================ Version 0.0.38 - Built on 01 September 2010 ================================================================================ #375 - TK10 data is stored little endian but the analysis software treats it as big endian. #376 - TK10 analogue channels are not picked up by the analysis software. #380 - Log Run dialog - don't show log run length to 1000th of a second. #378 - Add erase log function. Reduce number of dialogs when downloading a log. #359 - Selection issue in Configure log view. Implemented alternative view of log lane configuration. Fixed issue with outputs derived from outputs not showing up. Fixed error in DA99 lights export. Improved progress bar updates on TK10. #379 - Lap marker tool tips should also show RTC date and time if available. Note that due to potential marker configs already stored in projects, the time may not show up - either use a new project or close the log file and reopen it in the project. ================================================================================ Version 0.0.37 - Built on 25 August 2010 ================================================================================ #374 - DA99-L2 support. Fix problem with TK10 download (was always downloading run 0). Close device toaster when device removed. ================================================================================ Version 0.0.36 - Built on 25 August 2010 ================================================================================ #177 - Download Data from TK10. Avoid triggering update on views that track the selection if the selection has changed but is empty and the previous selection was empty. Calculate channel range for non-maths channels if the channel does not have min/max correctly defined in the log file. ================================================================================ Version 0.0.35 - Built on 23 August 2010 ================================================================================ Bug: Fix crash when selecting default track generation channels. Bug: Tentative fix for crash when removing log from project explorer. #373 - Bug: Track View: Displays "Invalid speed channel" when first created, even if valid speed channel is available. #372 - Bug: Trace: Timeline does not draw when scrolling. #371 - Bug: New project template does not load unless re-selected. ================================================================================ Version 0.0.34 - Built on 20th August 2010 ================================================================================ #138 - Alarm Report [Pro] #111 - Allow a channel to be used to generate lap beacons / markers. This is now possible via the alarm report [Pro]. #104 - DA99 Card Logger Support. #208 - DA1 endian selector for CAN in setup. #305 - Project directory mode. #105 - For card loggers, search for a drive containing the raw log file. Added Logger selection dialog. #366 - Fixed crash with channel statistics and different length log files. #360 - Lane name selection in Configure log view should track selection of grid. #361 - Configure log view: + / - icon next to lane name is always '+'. #367 - Generate channel colour palette based upon background colour. #362 - Snap sector times to distance channel sample position (resulted in excessive decimal places when displaying times in reports). #346 - Tacho gauge cannot handle an inverted range (where minimum > maximum). #365 - Math function to get previous sample value: prev(). #386 - Rename channel alarms -> limits. #152 - Zoom to alarm event [Pro]. Added new data range editor to histogram. Added new data range editor to xy plot. Added new data range editor to FFT. Added at_sample(...), at_seconds(...) and at_seconds_lerp(...) maths functions. Adjusted the context menus slightly to put "Add View" the top of the menu and not display it when clicking on the tab strip. Also moved items into alphabetical order. Implemented New Project dialog. Added Project Template system. Added "Set As" menu for laps in project explorer. Support all logger types. Restrict clicks to checkbox area in setup editor when toggling. Fixed crash setting up default view with < 3 channel names in the log file. ================================================================================ Version 0.0.33 - Built on 30 Jul 2010 ================================================================================ #333 - Sometimes track map does not update correctly after log is loaded. #356 - Non-auto limits for maths channels. #343 - Drag view box edges in log overview. #344 - Drag view box edges in lap bar. #322 - Add ability to set base units for a channel. Fixed crash with layer bitmaps. Fixed crashes due to pathological output channel loops. Such loops can no longer be created in new setups. Added edit button to Edit Maths dialog. Update chanel properties dialog if maths channel edited from within. Added optimization to synchronous distance->time lookup. Auto limits settings now imported from dlog99 mth files. Channel properties now work for channels that are not in the main layer's log file. ================================================================================ Version 0.0.32 - Built on 20 Jul 2010 ================================================================================ #339 - Separate layers management so that not only laps are required for overlaying data. #342 - Show selection length in status bar. #324 - Power markers should be visible by default. Separated enable state from visible state for markers. #297 - Horizontal boundary lines on trace view (alarm limits). When sorting channels list, the channel colour was not also displayed in sorted order. Maximum column count is now configurable in channel list view. #307 - Import DLOG99 mth maths files. #308 - Import/export maths from/to other projects. #332 - Divide by zero in maths channel can cause issues. Now can display values that are +/- infinity. #337 - Add channel flash when clicking on trace legend. #338 - Latch channel flash option in trace legend menu. Added maths function: filter_avg(x [,n]). Added maths function: is_lap_start(). Added maths function: integrate_lap(x). #349 - Error with GWv4 internal log data with same channel logged at different rates. Fix issue with context menu key on grids (affects selection). #351 - Default channel for gauges should not be "Engine Spd" when it doesn't even exist. Added layer icons to channels view header. #340 - Right click on ruler should not set the cursor - markers should be inserted at current position. Markers dialog now adds new markers at the current global cursor position. Add Marker menu item added to main log trace context menu. #149 - Multiple axes per log lane for each channel. #334 - Vertical range override on log lanes. #335 - Override channel colour in log lane. #352 - Make channel column in log trace config fixed. Added snap to fastest rate option (now the default snap setting). ================================================================================ Version 0.0.31 - Built on 28 Jun 2010 ================================================================================ #326 - Click on XY plot to set global cursor. #262 - Channels View: list of displayed channels can be selected. #312 - Generate distance channel lookup in channel itself. #315 - Lap distance functions not working with calculated distance. #311 - Layers: Default colour for layer two should not be black. Added default colours to the colour preferences for the first 8 layers. #301 - Ability to click on track to move to that position in the lap is broken. #319 - Retry option when dongle is not attached. #320 - Distance channel is always recalculated whenever maths channels changed. Improved performance of maths functions involving the distance channel. Fixed error in maths functions involving distance. Distance channel could be recompiled several times after loading a project. #314 - Selection on track map broken. #316 - Switching from Time to Distance mode zooms the trace out to full. #323 - Retain name/units edit boxes in maths editor for existing channels. #303 - Raw value bit manipulation operators: * Shift Left: << * Shift Right: >> * Bitwise AND: & * Bitwise XOR: ^ * Bitwise OR: | Added support for hex numbers to maths (e.g. 0xFF). Added buttons to maths editor for '<<', '>>', '&', '|', '^', '&&', '||'. Added maths function: real(x) cast. Added maths function: raw(x) cast. #304 - bit extraction and combination functions: Added maths function: mask(nbits) Added maths function: mask(nbits,shl) Added maths function: combine(msb,lsb,lsb_bits) Added maths function: combine8(msb,lsb) Added maths function: combine16(msb,lsb) Added maths function: complement(value,nbits) Added maths function: log2(x) #327 - F5 key should refresh custom file browser. #318 - Indicate when logs are still being loaded in the status bar. #321 - Snap. #328 - Implement user setting of snap divisor. Changed 'Locate Range' context menu items in project explorer to 'Zoom to ...'. Various optimizations for fixed rate channels. Changed locking strategy of maths channels to improve performance. Fixed limits change notification. Added file associations to installer. Don't update xy plot data when not shown. Refactored channel list handling to avoid rebuilding sort index when cursor is moved. Gives a big speed improvement in some cases. ================================================================================ Version 0.0.30 - Built on 10 June 2010 ================================================================================ Changed terminology of 'overlays' and 'primary view' to 'layers'. 'Primary view' is now 'main layer'. #69 - Add new markers / edit markers. #256 - Export KML file from GPS track map. #309 - [Tentative] Lock up on load of log on some XP machines with HT processor. #292 - Display units selector should only show units that match the channel quantity. #291 - Maths Editor: Auto-complete units should be filtered contextually. #295 - Setup Editor: Don't display error if loading last setup fails. #296 - Distance channel setup: when speed channel does not have units, calculated distance is invalid. #232 - Double click a log file to open - GDA always starts with a default template. It would be nice if it remembered your last screen layout instead. - Handle mixed units better in channel properties. - If multiple channels were being edited then the same units would be set on all channels even if no selection was made. - Fix memory leak when creating a new calculated distance channel. - Fixed resources compilation which was not taking branding key into account. - Fixed potential crash in GPS track mapping. - Added maths function to get absolute distance. - Added maths functions to get lap number and lap time/distance. - Internal refactoring of lap and marker handling. - Multiple threads can now concurrently access much of a log file's data which improves performance for most commonly executed code. - Added additional error information to DA1 comms. - Modified marker storage slightly - this should upgrade from old versions of GDA OK but loading projects with old beta versions may not load correctly. - Changed menu layout. This may break existing keyboard shortcut configs. - 'All' could not be correctly set as main layer by the user and would not display a layer icon. #302 - Context menu: "Configure" and "Rename" can be confusing in certain situations. Re-arranged context menus to put items that are more contextually significant at the top of the menus. #306 - Don't display trace setup window after opening a log. #300 - Edit Maths: Changing name of a channel broken. - Always display '+' on shell tree view in attempt to improve speed of opening custom file dialogs. ================================================================================ Version 0.0.29 - Built on 04 May 2010 ================================================================================ #278 - Plot second layer on track map. Give track window focus when dragging cursor. #287 - Modifying track name in the track editor should set track window name. #286 - After track segments are created, segments bar on trace is not updated. #279 - Plot second layer on tachometers. #243 - Edit multiple channel properties at once from channels view. #284 - Integrator sometimes appears to accumulate when the channel being integrated is zero. #259 - Smarter view configuration window placement. #254 - When adding new objects, pop up configure box if appropriate. #258 - Quicker access to edit a current maths channel - either from right click on channel list, or from channel properties. #235 - To select an area on the main graph, use double click as well as current method. #239 - Some anomolous drawing of graph lanes - sometimes the marker lines don't get drawn in the top lane and the shading can be incorrectly applied. #282 - Maths manager dialog: Label maths channels list area. #288 - Tooltips on Add/Remove buttons. #231 - Setup test dialog. #290 - Distance channel config should set an override for the base units, not set the ui units. #289 - Areas that require distance in metres should convert locally. General refactoring of units. #294 - Display status bar distance in distance channel units. #218 - User selectable display units. #293 - Display distance ruler in distance channel units. Maths: Casting floating point value to boolean changed so that it must have a magnitude or 1 or greater to evaluate to 'true'. Avoid blocking main thread for too long whilst requesting channel report update. Added SampleCache unit test [debug]. Altered locking strategy of maths channels to reduce contention with UI thread and make channel read requests abortable when a channel requires recompilation. Added some optimizations to user interface. Now avoiding main thread notifications when channels are being updated which reduces effect of UI becoming sluggish when [un]enabling maths channels. Distance channel quantity and unit round the wrong way. Reverted to VS2008 compiler so that GDA continues to run on Windows 2000 and Windows XP versions before SP2. Improved maths channel cache performance. Particularly in debug build. Added regression test for loading of projects where log loads before the project has finished serializing. [and fixed issue] Display base units in channel properties. ================================================================================ Version 0.0.28 - Built on 21 April 2010 ================================================================================ #280 - Solid colour setting not saved on xy plots. #281 - Colour option for cursor on XY Plot. Fixed default colour/gradient on xyplot and status light config dialogs. #277 - Improve default zoombar colours to make them more visible. Added independent second gradient colour for zoombar face gradient. Added GemsCharcoalMediumLight and GemsCharcoalLight colours. #283 - When editing maths channel code, autocomplete dialog flashes up in the bottom right of screen. #228 - Display available logging time in setup editor. Tentative fix for crash when loading project and one of the logs is loaded before the project explorer tree is serialized. Tentative fix for crash when opening a new project with the maths editor open. ================================================================================ Version 0.0.27 - Built on 21 April 2010 ================================================================================ #257 - Maths channels sometimes not initializing correctly and displaying zero. Reworked maths channel change notification handling and delayed applying local + global maths libraries to improve performance when multiple updates are applied in succession. #268 - Delete parent user views icon crashes app. Disable rename/delete/icon buttons in user views config when not applicable. #265 - Open last calibration at startup in preferences should be 'project'. Now also displays the correct value. #266 - Menu option to un-vertical expand lane in log trace. #267 - Add incremental search to channel values window. #269 - Right menu when clicking on lap sector no longer available. #261 - Log notes icon is different between project explorer and main view menu. #270 - Segment strip can get overlapping segment names. #273 - Display error message when trying to write to a read-only setup file. #271 - Limit DA1 setup to 32 CAN ID's. #272 - Limit range of rates in DA1 setup. #274 - Changing output rates to 'off' does not get saved in setup correctly. #263 - Changing maths channel name does not update in the log trace window. Additionally, other views are updated in response to channel name changes. Names are not updated if a channel with the original name still exists in another log file. #264 - Offer option to display log as primary view after download. #238 - Toolbar buttons - latch state looks the same as mouse highlighing. Maths: atan and acos were internally calling tan and cos, respectively. Performance: Made log channel info retrieval lock-free to generally reduce contention in the main user-interface thread (feels snappier). Limits thread is now a single thread rather than per channel to reduce load and calculations are queued so that in many cases, scheduled calculations can be requeued and reduce overally CPU load, especially straight after opening a log. Various other small performance enhancements. Updated to boost 1.42 Updated to wxWidgets 2.8.10 Updated to VS2010 ================================================================================ Version 0.0.26 - Built on 09 April 2010 ================================================================================ #12 - Math Channel Management [Pro]. #108 - Auto Log file naming [Pro]. #207 - Build manual separately per branded build. #141 - Improve track generation algorithm for non-circuit tracks (average offset). #143 - Display units in UI. #135 - Display deltas between main and layers on the log trace. #212 - 'Add Views' should be available from the view menu. #222 - Additional meta data (weather). #217 - Improve emerald performance when reading notes (rework of emerald dll). #86 - Config dialog for Tacho. #176 - Remove properties option from context menu (using config dialogs). #223 - Setup: Disallow selection of maths channels as output sources. #224 - Setup: Overview of channels - include maths + outputs in one list. Setup: added overview of inputs. #227 - Can't remove channels from log trace if they have units. #225 - High frequency bins on FFT show incorrect values. #233 - Double click a log file to open - the start page should not be shown. #234 - Data file RB2_05 crashes GDA when opening it. #240 - Lap bar should be drawn using distance when in distance plot mode. #237 - Edit menu not working (highlight when copy/paste etc are available). #242 - Circular dependency problem. #249 - Icon to identify channel type in channels list. #247 - XY Plot: Separate gradients for density bitmap / normal plots. #248 - XY Plot: Sensible default solid point colour. #241 - XY Plot: in density mode, zero points are not displayed. #253 - XY Plot: channel labels sometimes overwrite axis values. #252 - XY Plot: display cursor. #229 - Setup: Reorder items in lists. 3d effect on channel colour icon in channels list. Fixed default name for function tables. Channels can now be drag/dropped from the channels list into channel picker controls. Added more predefined units. Added autocomplete for unit selector. Preparatory work for tk10 comms. Pop-up toaster window when logger is connected to the system. Added root log folder handling, with buttons in the log file dialog. Particularly useful in conjunction with auto log file naming. Fixed extract setup icon. Increased default Y range of FFT. Changed FFT axis titles and added an additional label for the channel being analysed. Use square brackets on histogram y axis units. Fixed an issue with project serialization (load/save). Notes menu item now shows notes of the primary log. Implemented fullscreen mode. Changed crash report email address to gda@gems.co.uk. Fix crash when right clicking on invalid area or segment strip. Fix crash when closing application with a log trace config dialog open. Pick an appropriate time-base channel for math scripts that do not operate on any channels but generate time-varying data. Fixed autohide tabs from walking down the screen when loading projects. ================================================================================ Version 0.0.25 - 04/03/2010 ================================================================================ #87 - Config dialog for Status Light. #204 - Dongle update form does not close after successful update. #205 - Min value on tachometer can not be changed from zero. #209 - On Quick Start window, need options to load data to new project. #210 - Set default scheme and tacho style to dark style. #214 - Add 'Tyre Type' to notes entries. #215 - Ability to turn off layers on Trace Overview. #216 - Config dialog for NumberView. ================================================================================ Version 0.0.24 - 01/03/2010 ================================================================================ NOTE: channel reports will not load back in correctly from existing project files, as the structure of archives has changed slightly without being backwards compatible. Refactored channel reports slightly and renamed some of the configuration options to make them more obvious. Ticket #201 - Channel Report: should be possible to have laps as subgroup of channel. Ticket #186 - Add Time and distance to channel report. Added additional time/distance statistics. Shortened names of some statistic quantites. Added tool-tip long names for statistic quantities. Changed defaults for log view statistics and channel reports. Ticket #191 - Define more units. Added some physiological units. Ticket #193 - During log playback in distance mode, clicking on the trace sends the cursor back to beginning of the lap. Ticket #194 - Channel statistics do not update during log playback. Changed default cursor to arrow and selection to I-beam on log trace. Ticket #74 - Highlight or flash the plotted channel when the channel is selected in the channel values list. Ticket #184 - [Internal] Log file meta data. Ticket #197 - Display/Edit notes and meta data. Ticket #18 - Prompt for details about car/track/driver. Ticket #198 - Configurable temp folder for data downloads etc. Ticket #199 - Change list modifier buttons to be bitmap buttons in trace config. Ticket #200 - Add button in channel report config should show dialog for channel. Ticket #6 - Display car/driver/track in project explorer. Fixed loading of GLO files. Fixed save of downloaded log/setup onto a different volume/system to the temp folder. Fixed extraction of setup data from log file. Remember size and splitter positions in log file dialog. Fix crash toggling primary layer. Fixed extended CAN code export - porting from delphi translated bitwise OR into logical OR. Did some internal refactoring of range handling. Ticket #145 - Layer offsets. ================================================================================ Version 0.0.23 - 09/02/2010 ================================================================================ Ticket #16 - User defined reports [Dongle]. Ticket #188 - Extract setup from log file. Ticket #189 - Fix number gauge drawing. Fixed single sample phase delay in filtering functions. Ticket #190 - Fix auto-complete in maths editor. Added autocomplete for functions and constants. Fixed arity of gaussian filter function overload. Ticket #80 - Ability to click and drag on the track to move the cursor through the lap. Hid undo/redo items in edit menu until undo is implemented (GDA 4.1). Fixed a problem with the processing of log files in optimised builds. Fixed an issue with signed 8bit raw channels. ================================================================================ Version 0.0.22 - 03/02/2010 ================================================================================ Refactored handling of scaling. This will affect ranges loaded for some views. Updating & saving your projects will resolve this. Ticket #172 - DA1 logs: Drop record blocks directly before invalid end of block markers. Ticket #173 - Optimize log playback: * Applied a number of optimizations to the events that occur when setting the cursor position in a log trace (as a result of profiling). * Reduce blit sizes in many cases when drawing log traces to improve performance. * Changed animation timer to throttle back when cpu is under load. Ticket #175 - After loading, if zoom area is changed, then a tab with a trace which has not been shown yet is selected, the previous zoom area is restored. Ticket #174 - Double clicking on channel report: move cursor to occurrence of single sample quantities (e.g. min/max). Note: this may not happen in saved projects - you will need to update the setting for the stats view. Made lap and segment strips optional. Installer: Detect if application is running before allowing install. Ticket #101 - Add a "clear settings" option to the installer. Ticket #171 - Show selection and view range on lap strip. Ticket #161 - Optionally hide legend per-lane on log trace. Improved resize policy for the grid columns in the log trace config dialog. Ticket #179 - Expand log lane / all lanes to show data full scale. Ticket #180 - X scale not working on histogram plot when not manually scaled. Ticket #167 - Time selection options for xy/histogram should also have 'primary' as an option. Also added 'view' option. Refactored lap/mode handling. New archives may not work correctly in older beta versions (lap/mode selection in xy plot / histogram view). Ticket #154 - Log Playback - Option for looping primary lap. Ticket #71 - Overview mode for log trace. Fixed an error in obtaining the sample position from log iterators. Ticket #168 - Maths: Integrate Functions. Ticket #169 - Maths: Filter Functions. * Lowpass windowed sinc. * Highpass windowed sinc. * Bandpass windowed sinc. * Bandstop windowed sinc. * Gaussian smoothing filter. Ticket #170 - Maths: Differentiate Functions. Added basic cache to maths channels. Ticket #146 - Sort out min/max handling for maths channels. Fixed an issue with markers not being displayed correctly on logs with high run-times. Ticket #44 - FFT. Ticket #126 - "Uprade to Data Analysis Pro" item in help menu list of non-dongled versions. Ticket #150 - Inverted (green) background colour for fastest lap in project explorer. Ticket #183 - Add log file button in Project Explorer. ================================================================================ Version 0.0.21 - 13/01/2010 ================================================================================ Add log playback control buttons to toolbar. Ticket #162 - Double click on trace scroll bar to zoom to primary layer. Ticket #163 - Load/save channel values grid column widths. Ticket #164 - Double click vertical scroll in log trace should reset. Ticket #166 - Can not select on trace timeline (right click - select) the last segment in the lap. Click / click & hold in scroll track will scroll like a standard scroll bar. Reduced size of gap between application lap strip and tab area. Lap strip now responds to marker changes. ================================================================================ Version 0.0.20 - 12/01/2010 ================================================================================ Fixed crash with new project when a channel report/time report is displayed. Fixed reset of channels in histogram view. ================================================================================ Version 0.0.19 - 12/01/2010 ================================================================================ Single click in application lap strip zooms to range. Fixed crash on new project. Fix log trace offset in distance plot mode. Fixed lap overview strip in distance mode. ================================================================================ Version 0.0.18 - 12/01/2010 ================================================================================ Ticket #33 - Lap overview strip in LogView. Ticket #159 - Channel Stats window: Display lap names instead of e.g. 'layer 1' or 'layer 2'. Ticket #160 - Re-focus main window if closing setup editor when log playback is running. Fix context menu on channel stats frame title bar. Clamp cursor position when scrolling with arrow keys. Added handling for HOME and END keys to log trace view for start/end of the log. Added handling for Ctrl-HOME and Ctrl-END keys for start/end/next/prev lap. Added handling for Shift-HOME/END for selecting up to the start/end of log. Added handling for Shift-Ctrl-HOME/END keys for selecting laps. Added handling for Shift-Left/Right for selecting. ================================================================================ Version 0.0.17 - 08/01/2010 ================================================================================ Ticket #153 - Select a range of laps in project explorer and zoom to them. Ticket #158 - Fixed load of split marker modifiers from project. Added slight optimization to gps track mapping - transform points using a rotation matrix rather than a quaternion. Added 'show alarms' option to drop-down menu for channels in log trace view. Modifying the log trace whist the config dialog is open updates the dialog. Global view range handling. Log views now track the global view range unless set-up not to do so. Made highlight of non-primary areas in log trace optional. When log trace is loaded, don't reset view range if log is not yet loaded. Fixed an error with time calculations when reading samples from stf data sources. ================================================================================ Version 0.0.15 - 06/01/2010 Version 0.0.16 ================================================================================ Fixed possible crash when displaying layer differences in report view in some view modes. Fixed grid line rendering issue with large column/row spans in channel report (and other grids). Channel statistics view now prevents user from manually editing channels as these channels would change if the user changed page or changed the trace setup. Added delta symbol to the channel report for layer difference column. If log files cannot be found when opening a project, ask the user if they would like to find it. Gauges now update after asynchronous read of log data has completed (i.e. display the correct value for the current cursor position). Added auto scale option to bitmask setup editor. ================================================================================ Version 0.0.14 - 05/01/2010 ================================================================================ Ticket #11 - Channel Statistics Report. Ticket #68 - Display alarms on log trace. Ticket #70 - Option to build track segments from split markers. Ticket #75 - Export report to excel/csv etc (via copy to clipboard). Ticket #40 - Tape Measure. Ticket #84 - GPS track mapping. Ticket #130 - Draw of centre (zero) line on log trace. Ticket #147 - When dragging channels to log trace, ability to drop in between or at the bottom of lanes to add new lane for that channel. Ticket #148 - Auto segment generator does not number segments correctly when there are two turns in a row. Ticket #155 - When mouse is clicked to start selection on trace, starting point is moved from the actual position of the cursor to the position of the mouse. Fixed a couple of possible crashes. Configuration dialog for time report. Double click in report cell focuses log trace (depending upon policy in the views configuration). Channels can be dragged into channel report + channel report config dialog. Colours are now configurable for report views. Changed configure icon in caption bar of view windows. Added 'Zoom to All' menu option in log trace views. Fixed XY plot gradient update after loading from project. Fixed XY plot channel update after loading from project. Selection in log trace is now blended so that grid lines are still visible. Fixed XY plot and histogram updating when selection changes. Improve track drawing speed when the track has a large number of points. Fixed some issues with selections in distance plot mode. Fixed up/down buttons on channel report editor. Track selection now correctly updates after loading in the project. Added track start angle option. Fixed track scaling when track is wider than the view. Now possible to save log files from the project explorer (in preparation of other features). Fixed a couple of issues saving log/setup files that have non-recording outputs in them (record table). Fixed: Maths channels whould not be remembered by track mapping. Fixed: CAN speed box in logger setup was not correctly updated after loading. Fixed: Entering invalid text in CAN output box in setup editor could lead to an unhandled exception. Display logging rate in channel properties box. Fixed potential crash when processing log files. Fixed a problem with log processing when there is more than one record table entry for the same channel. Added option to open log in a new project after download. ================================================================================ Version 0.0.13 - 15/12/2009 ================================================================================ Ticket #94 - Log Playback Fixed some issues with DA1 setups (CAN ID's and serial channels). ================================================================================ Version 0.0.12 - 09/12/2009 ================================================================================ Fix crash opening log files that have chanels with no sensors defined. ================================================================================ Version 0.0.11 - 04/12/2009 ================================================================================ Ticket #29 - Math Channel Editor from Setup Editor [Dongle]. Ticket #91 - Ability to be able to right-click, add object for a channel from the channel list. Ticket #119 - Setup editor - when creating a new output, scalar, bitmask etc give it a default name (eg Scalar 1). Ticket #139 - Number gauge does not draw bottom border at smaller sizes. Ticket #140 - Setup Editor - clicking a blank cell in the channels section, brings up value which then goes when cell loses focus. Ticket #142 - Use custom file dialog for saving log after download. Ticket #144 - Setup Editor: cannot enter hex number in bitmask editor. Added GPS protocol selection to DA1 setup. Fixed DA1 Erase after log download problem. Improve message if download is empty. Started adding Maths to Setup Editor. Added bitmaps to buttons in Setup Editor. Load/Store maths in stf data file. Added seconds(), msecs() and usecs() maths functions. More to come. Updated to boost 1.41. Factored auto-complete out of colour/gradient selector boxes so that it can be more generally useful (will be used by code editor). Syntax highlighting now correct. Changed math language grammar to make it context free. Added comments to math language. Added autocomplete to to math editor. Math editor colours now customizable. Added toolbar to math editor for inserting operators. Added function/constant/channel/unit insert list to Math Editor. Default channel rate is no longer 1 MHz. ================================================================================ Version 0.0.10 - 18 November 2009 ================================================================================ Fixed "timer creation failed" error (due to wxWidgets 2.9.0 update). ================================================================================ Version 0.0.9 - 18 November 2009 ================================================================================ Ticket #82 - Handle delete key in log trace config. Ticket #85 - Right click on channel in channel list to add views. Ticket #121 - Setup Editor should automtically load the last setup used. Ticket #122 - Add Create New Setup button to setup editor. Ticket #123 - Current Setup Name (including * or Modified when changed) should be shown in Setup Editor Title Bar. Ticket #128 - Lap report rolling fastest should not be able to wrap around from last -> first lap. Ticket #131 - DA1 Firmware upload jumps to operational code. Ticket #132 - Flag when project changed. Ticket #133 - Config button next to close button on track, trace, xy plot and histogram. Ticket #136 - Display selection on track object. Update xyplot view when deselecting. Dont autohide project explorer when toggling layer. Improve keyboard handling in log trace config dialog. DA1 - newer versions reverted to use 'question + answer' comms. Updated to wxWidgets 2.9.0. Unit conversions can now be accessed globally in a thread safe manner. Started work on Maths Channels: Implemented Parser. Implemented virtual machine. Implemented basic maths channel. Implemented code optimizer (constant folding). Implemented unit conversions. ================================================================================ Version 0.0.8 - 28 October 2009 ================================================================================ Ticket #43 - Histograms. Improved colour customization. Ticket #96 - Customize trace colours. Implemented inheritable properties. Most tachometer properties now have global default properties in the main settings. This will be expanded to cover other gauge types in the future. Ticket #76 - Allow XY plots and histograms to have conditions applied. Ticket #127 - When xy plot has focus, application loses focus. ================================================================================ Version 0.0.7 - 5 October 2009 ================================================================================ Ticket #42 - XY Plot. Ticket #125 - Crash opening invalid emerald file. Ticket #124 - Save new version problem with unsaved project. Ticket #73 - Drag and drop channels into plot area. Channels may also be removed by clicking on them in the log trace legend. Fixed issue loading sample EVO9 DA1 setup. Fix hang when loading corrupt setup file from DA1. Added 'firmware upload' command for DA1. Added 'erase log' menu command. Gain now works for scaling channels when applied to sensors. Fixed a crash when attempting to access data from output channels that have no source. Various fixes in Emerald4 to cope with a wider range of log files, including DA97 files. Fix problems opening corrupt files. Now displays a dialog box if load fails and adds this to the status in the project explorer. Added gradient to non-primary region areas on the log trace that blends with the graticule lines. Highlight selected lane when displaying context menu. Dont display legend on log lanes when there are no channels. Implemented faster data download protocol for Issue-D DA1's. Added program button to setup editor. Added ability to drag existing selection position (retaining selection 'size'). ================================================================================ Version 0.0.6 - 21 September 2009 ================================================================================ Changed branding keys - this will affect default folders used to store log data and projects. Ticket #83 - DA1 Download. Ticket #90 - DA1 Setup Upload. Ticket #92 - Separate Download Setup command for DA1. Ticket #98 - Value on trace doesn't update correctly. Ticket #88 - Change default threshold colour from black to red. Ticket #89 - DA1 Setup Configuration. Ticket #79 - Zoom with +/- in addition to z/x. Ticket #97 - If logs folder doesn't exist when opening log you get an exception box if you try to create it on a non-existing drive. Ticket #102 - Improve settings for track segmenter. Improved corner type detection algorithm. Fixed change in distance scaling. Ruler now has correct range in distance plot mode. ================================================================================ Version 0.0.5 - 14 August 2009 ================================================================================ Make time report display track segments by default. Fix secure stl error in async track segment handling. Fixed a problem loading colour gradient from archives. Fixed and error in serialization of tacho gauges. This will slightly break existing projects (gradients will be interpreted as solid colour and display as black). Ticket #81 - Custom threshold colour on tacho reverts to BLACK when reloaded. Ticket #72 - Implemented branded builds: TK-10 Data Analysis Data Analysis Data Analysis Professional ================================================================================ Version 0.0.4 - 13 August 2009 ================================================================================ Added split mode to markers. Ticket #54 - Segment editor in track editor. Ticket #65 - Display track segments on the track. Ticket #14 - Lap Report. Ticket #15 - Best theoretical lap calculation based upon best sector times. ================================================================================ Version 0.0.3 ================================================================================ Ticket #45 - Tacho Gauge. Ticket #47 - Status Light Gauge. Ticket #48 - Number Gauge. Ticket #49 - Make Channel Properties Dialog Modeless. Ticket #56 - Cursor position on track does not update unless in distance plot mode. Ticket #60 - Default template / prompt when opening a new log file with an empty project. Improved efficiency of updates to distance + current layer values at the cursor. Added background pre-loader to reduce dll load demand when displaying file dialogs (i.e. the dialogs display faster). Sorted out a couple of issues with zoom-dragging using the log trace ruler. Mouse cursor is now hidden when zoom-dragging. Fixed lag of selection repainting. Modified zoom behaviour/keys slightly. Shift key is no longer used to control the extent of scroll/zoom. This is acheived through acceleration of the movement. Display cursor time + distance in the status bar. Fixed a potential crash after closing a trace panel. Added channel picker editor to log trace config dialog. ================================================================================ Version 0.0.2 - 22 July 2009 ================================================================================ Ticket #39 Capture mouse when dragging cursor on log trace. Ticket #13: Calculated Distance Channel Added Channel Legends to log Traces. Sorted out a couple of issues with line rendering in the log trace + sped up line rasterization a little. Ticket #10: Track mapping from G-Sensor. Basic distance channel calculation. Improved distance plot speed. Various plotting optimizations - improved data access speed and improved rasterization speed. ================================================================================ Version 0.0.1 - 25 June 2009 ================================================================================ Fixed layer serialization. Update trace when colours change. Make cursor match in all traces. Set correct plot basis when creating a log trace. Improved layer icons. Make non-primary view areas darker. Update trace when channel limits changed. Made it possible to assign an alpha (opacity) value to layers. Layers can now be set up to use a channel's colour rather than fixing it to the layer colour (allows faded traces using alpha). Fixed "help not found" issue. Serialize marker config. Ticket #41: Line thickness. ================================================================================ Version 0.0.0 ================================================================================ Ticket #1: Optimisation: Improve distance plot speed by using LogIterator. Ticket #2: Update background graphic on start page. Ticket #3: Application icon. Ticket #5 [Using alternative method] Ticket #7 Channel Values Grid Ticket #8 Alarm Limits in Channel Values Grid. Ticket #9: Drag and Drop when configuring lanes in log view. Ticket #23: Display traces from multiple log files in the same view. Ticket #27 [Using alternative method] Ticket #28 Improve repainting of LogView when resizing. Ticket #31: Update About Box Image. Ticket #32: Display Markers in LogView. Ticket #34: Y-Axis ticks & labels on LogView. Ticket #36: Layer different laps. Ticket #37: Multi log file support in channel values window. (Column per layer). ================================================================================ End of File ================================================================================